1954381-1 TE Connectivity, 1954381-1 Datasheet - Page 29
![GROUNDING CLIP, 12-10 AWG GROUND WIRE](/photos/37/2/370208/4398311_sml.jpg)
1954381-1
Manufacturer Part Number
1954381-1
Description
GROUNDING CLIP, 12-10 AWG GROUND WIRE
Manufacturer
TE Connectivity
Type
Grounding Clipr
Series
SOLARLOKr
Specifications of 1954381-1
Product Length (mm)
20mm
Product Depth (mm)
32.5mm
Product Height (mm)
24.5mm
Accessory Type
Grounding Clip
Rohs Compliant
Yes
Product Type
Accessory
Screw Size
10-32 Thread Cutting
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Reflow solder capable to 245°C, Reflow solder capable to 260°C
Rohs/elv Compliance History
Always was RoHS compliant
Lead Free Status / RoHS Status
Compliant
For Use With
12-10 AWG Solid Un-Insulated Ground Wire
Lead Free Status / Rohs Status
RoHS Compliant part
3.4 DC/AC Converter Receptacle
SOLARLOK Interconnection System
Assembly and Installation Guidelines
1 Place a single wire seal onto the wire and strip wire
2 Crimp the contact using the correct applicator for the wire gauge (# 114-74013)
3 Place O-ring onto the connector housing; push in wire to stop until contact locks into the housing
4 Push seal into the housing
5 Assembly of the cover cap (not available with every version) and mounting in front panel
■
■
■
All specifications subject to change. Consult Tyco Electronics for latest specifications.
(single wire seals are not available with every version).
Required panel mount hole diameter: Diameter 12.5 mm.
The panel thickness must not be under 1.0 mm.
For environmental protection of the unmated connector, use of the covering cap is recommended.
Cover:
Part No. 1394739-1
(continued)
Catalog 889753-3
Revised 6-2008
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 9
27