SN3C1-124 AVX Corporation, SN3C1-124 Datasheet - Page 21

• Manufacturer Part Number: SN3C1-124
• Manufacturer: AVX Corporation

Specifications of SN3C1-124

• Mounting Style: Through Hole
• Operating Temp Range: -55C to 125C
• Voltage Rating Max: 50VAC/50VDC
• Lead Free Status / RoHS Status: Not Compliant

Bolt Style EMI Filters
SA Series – 4-40 Thread - Epoxy Sealed –
Circuits Available – C & L
SPECIFICATIONS
10. Supplied with mounting nut and lock-
11. Insertion Loss for the “C” and “L” sections
1. Plating: Silver standard – Electro-tin or
2. Material:
3. Operating Temperature Range:
4. Insulation Resistance:
5. Dielectric Withstanding Voltage (DWV):
6. DC Resistance (DCR): .02 ohm,
7. Dissipation Factor (DF): 3% maximum
8. Rated DC Current: 5 Amps, maximum
9. Recommended Mounting Torque:
Case: Cold rolled steel
Leads: Beryllium copper (steel or half/hard
-55°C to +125°C
washer - See Filter Design Guide Screw
and Locking Washer Table
are equivalent due to the saturation
characteristic of the ferrite bead element
at rated current. At lower currents the “L”
becomes much more effective.
R-level designs:
Class B, Class S designs:
maximum
32 oz-in. ± 4 oz-in.
At 25°C: 1,000 megohm-microfarad
At 125°C: 100 megohm-microfarad
2.0 times rated DC voltage
2.5 times rated DC voltage
copper leads available)
gold available
min., or 100,000 megohms
min., whichever is less
min., or 10,000 megohms
min., whichever is less
APPLICATIONS
The SA series provides effective filtering
in the RF and MICROWAVE frequency
spectrums from 10 MHz through 26 GHz.
Designed for mounting in a tapped
bulkhead or with the standard nut and
lockwasher provided, it is ideal for high
impedance circuits where large capaci-
tance values are not practical. In the “L”
section version an internal ferrite bead
CHARACTERISTICS
• Meets or exceeds the applicable portions
• Smallest screwbody filter available.
of MIL-F-28861/6. See QPL listings.
millimeters (inches)
(See Note 4)
0.05 (.002)
0.13 (.005)
0.25 (.010)
0.41 (.016)
0.51 (.020)
0.66 (.026)
0.76 (.030)
2.84 (.112)
.154
.159
3.05 (.120)
3.68 (.145)
3.91 (.154)
4.04 (.159)
5.59 (.220)
6.10 (.240)
9.14 (.360)
—
—
SA1
C
STANDARD CONFIGURATION
Notes:
1. Standard catalog designs
2. “A” dimension of .120 ± .005
CIRCUIT DIAGRAMS
have .020" dia. lead. MIL-F-
28861/6 calls for .026" dia.
.026" dia. will not be supplied
unless specified.
will satisfy M28861/6-003
requirement for .145 ± .030.
All “SA” series are supplied
A = .120 ± .005.
±.020
.240
A
element provides both inductance and
series resistance (lossy characteristic)
which improves insertion loss and pro-
vides superior transient performance. The
SA series comes with a standard .020
diameter beryllium copper lead. Alternate
lead lengths, diameters of .016 or .026
and alternate materials in steel or half-
hard copper are available.
• Features rugged monolithic discoidal
• Epoxy seal on both ends.
MAX.
capacitor construction.
.030
±.010
MAX.
.220
.030
±.020
.360
THRD
END
SA2 (See Note 3)
.112-40 UNC-2A
(4-40)
3. All SA2 L-Section Filters have
4. Metric equivalent dimensions
L
2
inductor (bead) at threaded
end.
given for information only.
A = .120 ±.005
.020 ±.002
(Std. - See Note 1)
(See Note 2)
19