TZ03Z500E169B00 Murata, TZ03Z500E169B00 Datasheet - Page 8

• Manufacturer Part Number: TZ03Z500E169B00
• Manufacturer: Murata
• Type: Ceramicr

Specifications of TZ03Z500E169B00

• Capacitance Range (min/max) (pf): 6/50
• Tolerance (+ Or -): 0% to 100%
• Voltage: 50VDC
• Temp Coeff (dielectric): NPO±300 ppm/°C
• Operating Temp Range: -25C to 85C
• Mounting Style: Through Hole
• Construction: Rear Adj
• Q: 300
• Failure Rate: Not Required
• Product Length (mm): 6mm
• Product Depth (mm): 6mm
• Product Height (mm): 4.8mm
• Product Diameter (mm): Not Requiredmm
• Lead Free Status / RoHS Status: Compliant

1
!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
qSoldering profile for Lead-free solder (96.5Sn/3Ag/0.5Cu)
1. Do not use the trimmer capacitor under atmosphere
2. Before using trimmer capacitor, please store under
3. Do not store in or near corrosive gasses.
4. Use within 6 months of delivery.
5. Do not store under direct sunlight.
6
150 to 180 C 60 to 120sec.
150 to 180 C 60 to 120sec.
Temp. (T1)
Temp. (T1)
Land Pattern
Temperature Profile
Notice (Storage and Operating Condition)
of RTV silicone rubber (Room Temperature
Vulcanizing Silicone Rubber) except Acetone
liberating silicone sealant.
the condition of -10 to +40 degrees C and 30 to
85%RH.
Reflow Soldering Profile
Solder Iron
Temperature of soldering iron tip
Continued from the preceding page.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Pre-heating
Pre-heating
Time (t1)
Time (t1)
350 10 C
T1
Temp. (T2)
Temp. (T4)
220 C
230 C
Standard Profile
t1
T3
T2
Limit Profile
Heating
Heating
2.2
1.2
t2
t3
30 to 60sec.
30 to 50sec.
Time (t2)
Time (t3)
time (s)
T5
T4
Limit Profile
Standard Profile
Tolerance: 0.1
260 +5/-0 C
temperature
temperature
245 3 C
in mm
Soldering time
Peak
Peak
(T3)
(T5)
3sec. max.
of reflow
of reflow
2 times
2 times
Cycle
Cycle
Standard Profile
6. Do not use the trimmer capacitor under the
wSoldering profile for Eutectic solder (63Sn/37Pb)
(1) Corrosive gasses atmosphere
(2) In liquid (ex. water, oil, medical liquid,
(3) Dusty / dirty atmosphere
(4) Direct sunlight
(5) Static voltage nor electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
conditions listed below.
(Limit profile: refer to q)
(ex. Chlorine gas, Hydrogen sulfide gas,
Ammonia gas, Sulfuric acid gas, Nitric oxide gas,
etc.)
organic solvent, etc.)
Temp. (T1)
Soldering iron power output
150 C
Pre-heating
30W max.
60 to 120sec.
Time (t1)
T1
Temp. (T2)
183 C
Standard Profile
t1
T3
T2
Heating
t2
Time (t2)
30sec.
time (s)
Cycle of solder iron
Standard Profile
temperature
230 +5/-0 C
1 time
Peak
(T3)
of reflow
1 time
Cycle
T13E.pdf
08.8.27