SPT2AF-12.5PF20PPM Seiko Instruments, SPT2AF-12.5PF20PPM Datasheet - Page 2

• Manufacturer Part Number: SPT2AF-12.5PF20PPM
• Description: CRYSTAL 32.768KHZ 12.5PF SMD
• Manufacturer: Seiko Instruments
• Series: SP-T2A-Fr
• Type: kHz Crystal (Tuning Fork)r

Specifications of SPT2AF-12.5PF20PPM

• Frequency: 32.768kHz
• Frequency Tolerance: ±20ppm
• Load Capacitance: 12.5pF
• Operating Mode: Fundamental
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 4-SOJ, 5.50mm pitch
• Size / Dimension: 0.343" L x 0.146" W (8.70mm x 3.70mm)
• Height: 0.098" (2.50mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Frequency Stability: -
• Other names: 728-1005-2

1.Scope
2.Designation
3.Shape and dimensions
4.Electrical characteristics
5.Shipment and packaging
6.Outgoing inspection
7.Warranty
8.Amendment or abolition of the specifications
9.Effectiveness of the specifications
10.Ohters
RoHS compliant
These specifications apply to QUARTZ CRYSTAL RESONATORS ( hereinafter
referred to as RESONATORS ) to be manufactured by Seiko Instruments Inc.
( hereinafter referred to as SII ) to
RESONATORS are designated " SP-T2A-F"(32.768kHz ).
As per the SP-T2A-F drawing shown on page 5 .
Specified on page 2 through 3.
5.1 (3,000) pcs are the standard lot size to which the lot number shall be allotted
5.2 The packaging shall conform to the resonator packaging standards.
6.1 When mutually agreed, the outgoing inspection shall be conducted as per
6.2 The outgoing inspection slip is not basically affixed to each packaging.
In the event that any defective RESONATORS or defective lot is found at
incoming inspection at
any defect resulting from failures in process-control at SII after incoming
inspection is found, good RESONATORS shall be supplied to
In the event that any trouble or problems rising directly from RESONATORS
occurs, it will be amicably settled between both parties, provided that
warranty shall be done within the score of replacement of good RESONATORS.
Amendment or abolition of the specifications shall be made upon mutual consent
between
it shall be amicably settled between both parties.
These specifications are effective after receipt of returned copies with your
approved sign.
These products use Pb in high melting temperature type solders exempted by
RoHS directive.
the standard on page 4.
Delivery Specifications
free of charge as a replacement ．
and SII. If any problem arises ,
and that