APS-12D-1-02/TR8 Everlight Electronics CO., LTD, APS-12D-1-02/TR8 Datasheet - Page 10

• Manufacturer Part Number: APS-12D-1-02/TR8
• Description: Optical Sensors - Board Mount Ambient Light Sensor
• Manufacturer: Everlight Electronics CO., LTD

Specifications of APS-12D-1-02/TR8

• Supply Current: 70 uA
• Operating Supply Voltage: - 0.3 V to + 5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Recommended Solder Profile
Notice:
1. Reflow soldering should not be done more than two times.
2. When soldering, do not put stress on the devices during heating.
3. After soldering, do not warp the circuit board.
Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350
than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each
terminal. Be careful because the damage of the product is often started at the time of the hand solder.
Repairing
Repair should not be done after the device have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the
characteristics of the device will or will not be damaged by repairing.
Surface - Mount Digital
Ambient Light Sensor with Proximity Sensor
Everlight Electronics Co., Ltd.
Document No: DLS-0000027
10
APS-12D-1-02/TR8
℃
for 3 seconds within once in less
http://www.everlight.com
Jul. 22. 2010.