E3ZM-D62 2M Omron, E3ZM-D62 2M Datasheet - Page 15

• Manufacturer Part Number: E3ZM-D62 2M
• Description: Photoelectric Sensors - Industrial Diffuse reflective NPN Infrared
• Manufacturer: Omron

Specifications of E3ZM-D62 2M

• Output Current: 100mA
• Sensor Output: NPN
• Supply Voltage Range Dc: 10V To 30V
• Sensor Input: Optical
• Output Type: NPN
• Supply Voltage Max: 30VDC
• Sensing Range Max: 1m
• Mounting Type: Cable
• Switch Terminals: Cable
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Nomenclature
Safety Precautions
Refer to Warranty and Limitations of Liability on page 20.
This product is not designed or rated for ensuring
safety of persons. Do not use it for such a purpose.
Do not use the product with voltage in excess of the
rated voltage. Excess voltage may result in
malfunction or fire.
Never use the product with an AC power supply.
Otherwise, explosion may result.
When cleaning the product, do not apply a
concentrated spray of water to one part of the
product. Otherwise, parts may become damaged and
the degree of protection may be degraded.
High-temperature environments may result in burn
injury.
The following precautions must be observed to ensure safe operation
of the Sensor.
Operating Environment
Do not use the Sensor in an environment where explosive or
flammable gas is present.
Connecting Connectors
Be sure to hold the connector cover when inserting or removing the
connector. Be sure to tighten the connector lock by hand; do not use
pliers or other tools. If the tightening is insufficient, the degree of
protection will not be maintained and the Sensor may become loose
due to vibration. The appropriate tightening torque is 0.3 to 0.4 N·m.
Sensors with Sensitivity Adjustment and
Mode Selector Switch
Through-beam Models
E3ZM-T@@ (Receiver)
Retro-reflective Models
E3ZM-R@@
Diffuse-reflective Models
E3ZM-D@@
Stability indicator
Mode selector
(Green)
switch
Precautions for Safe Use
Compact Photoelectric Sensor with Stainless Steel Case and Built-in Amplifier
WARNING
CAUTION
Operation indicator
(Yellow)
Sensitivity adjuster
power supply indicator
Infinite Adjustment Emitter
BGS Reflective Models
E3ZM-LS@@H
Through-beam Models
E3ZM-T@@ (Emitter)
Load
Do not use a load that exceeds the rated load.
Low-temperature Environments
Do not touch the metal surface with your bare hands when the
temperature is low. Touching the surface may result in a cold burn.
Rotation Torque for Sensitivity Adjustment and Selector
Switch
Adjust with a torque of 0.06 N·m or less.
Oily Environments
Do not use the Sensor in oily environments.
Modifications
Do not attempt to disassemble, repair, or modify the Sensor.
Outdoor Use
Do not use the Sensor in locations subject to direct sunlight.
Cleaning
Do not use thinner, alcohol, or other organic solvents. Otherwise, the
optical properties and degree of protection may be degraded.
Washing
Do not use highly concentrated detergents. They may cause
malfunction. Do not use high-pressure water spray in excess of the
specifications.
Surface Temperature
Burn injury may occur. The Sensor surface temperature rises
depending on application conditions, such as the surrounding
temperature and the power supply voltage. Use caution when
operating or washing the Sensor.
Stability indicator
or Emitter
(Green)
(Green)
E3ZM
Operation indicator
(Yellow)
Note:
Emitter: No indicator
15