E3S-LS10XE4 Omron, E3S-LS10XE4 Datasheet - Page 7

• Manufacturer Part Number: E3S-LS10XE4
• Description: Photoelectric Sensors - Industrial PROXIMITY
• Manufacturer: Omron
• Type: Background Supression Sensorr
• Series: E3S-LSr

Specifications of E3S-LS10XE4

• Features: Pin point focusable and area focusable models eliminate back ground objects
• Sensing Method: Diffuse Reflective
• Sensing Distance: 10 cm
• Light Source: Red LED
• Amplifier Type: Built In DC Amplifiers
• Connection: Prewired Cable
• Output Configuration: NPN
• Sensing Range: 3cm To 10cm
• Output Current: 80mA
• Sensor Output: NPN
• Supply Voltage Range Dc: 12V To 24V
• Length/height, External: 55mm
• Response Time: 1ms
• Output Type: Transistor
• Sensor Input: Optical
• Sensing Object: White Paper
• Sensing Light: Red
• Mounting Type: Bracket Mount
• Current - Supply: 40mA
• Voltage - Supply: 12 V ~ 24 V
• Package / Case: Module, Pre-Wired
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

E3S-LS
Precautions
Sensing Distance Adjustment
E3S-LS10XE4
Adjustment Method
1. Set the pointer of the sensitivity adjuster to the center of its
2. Turn the distance adjuster fully counterclockwise to the “S”
3. Set the sensing object in position.
4. Turn the distance adjuster gradually clockwise to a point
5. Adjust sensitivity.
Distance adjuster
revolution range.
position.
where both the LIGHT and STABILITY indicators light. Fix the
distance adjuster at that point.
Object sensed
Background object
É É
É É
É
É
É
E3S-LS20XE4
Adjustment Method 1
When the quantity of light reflected from the object is greater than
that from the background object, adjust the sensing distance in the
following sequence:
Adjustment Method 2
When the quantity of light reflected from the object is greater than
that from the background object, adjust the sensing distance in the
following sequence:
1. Set the pointer of the sensitivity adjuster to the center of its
2. Turn the distance adjuster fully counterclockwise to the “S”
3. Set the sensing object in position.
4. Turn the distance adjuster gradually clockwise to a point
5. Adjust sensitivity.
1. Set the pointer of the sensitivity adjuster to the center of its
2. Turn the distance adjuster fully counterclockwise to the “L”
3. Remove the sending object.
4. Turn the distance adjuster gradually clockwise to a point
5. Adjust sensitivity.
Distance adjuster
revolution range.
position.
where both the LIGHT and STABILITY indicators light. Fix the
distance adjuster at that point.
revolution range.
position.
where both the LIGHT and STABILITY indicators light. Fix the
distance adjuster at that point.
Object sensed
Background object
É É
É É É É
É É É É
É É
E3S-LS
7