D-436-0110 Tyco Electronics, D-436-0110 Datasheet - Page 2

• Manufacturer Part Number: D-436-0110
• Description: CONN SPLICE BUTT 20-26AWG RED
• Manufacturer: Tyco Electronics

Specifications of D-436-0110

• Terminal Type: Butt Splice, Inline, Individual Openings
• Number Of Wire Entries: Varies by Wire Size
• Termination: Crimp
• Wire Gauge: 20-26 AWG
• Insulation: Fully Insulated
• Features: Heat Shrink
• Color: Blue, Red Stripe
• Connector Type: Butt Splice
• Insulator Color: Red
• Termination Method: Crimp
• Wire Size (awg): 26-20
• Contact Material: Copper
• Contact Plating: Tin
• Insulator Material: PVDF
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 650038-000; 7-1195130-1

1.0
2.0
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
DRAWN BY:
If this document is printed it becomes uncontrolled. Check for the latest revision.
M. FORONDA
SCOPE
This document oulines the procedure to be followed to obtain immersion resistant 3 or 2 to 1 in-line splices
using Devices In-line Splice Sealing System D-436-0110
PROCEDURE
a. Strip all wires 6.35 to 7.92 (0.250 to 0.312).
b. Attach the single lead to the appropriate size crimp splicer using a Raychem AD-1377 crimp tool.
c. Pass the wires to be attached to the other barrel through the sealing sleeve from the three-hole insert end.
d. Insert wires into barrel and crimp. Care must be taken so that wires remain untwisted between the crimp
e. Apply heat, first to the three-hole insert and then to the other. Heat should be applied until insert melts
ANGLES: N/A
ROUGHNESS IN
MICRON
splicer and the three wire seal or the sealing sleeve cannot be positioned properly.
and flows axially along the wire.
Menlo Park, CA 94025, USA
Tyco Electronics Corporation
305 Constitution Drive
REPLACES:
Tyco Electronics reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
N/A
SPECIFICATION CONTROL DRAWING
DEVICES ASSEMBLY PROCEDURE
DCR NUMBER:
D001273
Raychem
Products
TITLE :
DOCUMENT NO.:
DATE:
PROD. REV.
.
IN-LINE SPLICE SEALING SYSTEM,
COLOR CODED with Inspection Slots
A
14-Nov.-00
2 or 3 to 1 SPLICE: TIN PLATED,
SCALE:
None
D-436-0110
SIZE:
A
DOC ISSUE:
SHEET:
1
2 of 2