67-22SURSYGC/S530-A2/TR8 Everlight Electronics CO., LTD, 67-22SURSYGC/S530-A2/TR8 Datasheet - Page 10

• Manufacturer Part Number: 67-22SURSYGC/S530-A2/TR8
• Description: Standard LED - SMD Red/Yellow-Green
• Manufacturer: Everlight Electronics CO., LTD

Specifications of 67-22SURSYGC/S530-A2/TR8

• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Technical Data Sheet - Preliminary
Top View LED with Bi-Color
Precautions for Use
1. Over-current-proof
2. Storage
3. Soldering Condition
Everlight Electronics Co., Ltd
Device No.: DSE-672-083
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30
2.3 After opening the package: The LED's floor life is 1 year under 30
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
1~5 °C / Sec.
Customer must apply resistors for protection; otherwise slight voltage shift will cause big
current change (Burn out will happen).
less. If unused LEDs remain, it should be stored in moisture proof packages.
storage time, baking treatment should be performed using the following conditions.
Baking treatment: 60±5
1~5 °C / Sec.
180~200°C
Pre-heating
120 Sec. Max.
EVERLIGHT ELECTRONICS CO., LTD
℃
for 24 hours.
60 Sec. Max.
Above 220°C
http://www.everlight.com
Prepared date: 20-Nov-2007
10 Sec. Max.
260°C. Max.
67-22SURSYGC/S530-A3/E3/TR8
℃
or less
Prepared by: Josh Chou
Rev. 1.1
℃
or less and 60% RH or
and 90%RH or less.
Page: 10 of 11