19-217/G7C-AL1M2B/3T Everlight Electronics CO., LTD, 19-217/G7C-AL1M2B/3T Datasheet - Page 10

• Manufacturer Part Number: 19-217/G7C-AL1M2B/3T
• Description: Standard LED - SMD Super Yellow Green
• Manufacturer: Everlight Electronics CO., LTD

Specifications of 19-217/G7C-AL1M2B/3T

• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4.Soldering Iron
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
Leliability Test Items And Conditions
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
The Leliability of pLoducts shall be satisfied with items listed below.
Everlight Electronics Co., Ltd.
Device No:SZDSE-197-G01
Tucheng, Taipei 236, Taiwan, R.O.C
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
EVERLIGHT ELECTRONICS CO.,LTD.
Prepared date: 17-10-2006
http://www.everlight.com
Tel: [phone]
Fax: [phone]
http://www.everlight.com
19-217/G7C-AL1M2B/3T
Rev. 2
Prepared by: Bian ChangYou
Page: 10 of 10