ZHX1010MV115THTR Zilog, ZHX1010MV115THTR Datasheet - Page 7

• Manufacturer Part Number: ZHX1010MV115THTR
• Description: Fiber Optic Transmitters, Receivers, Transceivers
• Manufacturer: Zilog

Specifications of ZHX1010MV115THTR

• Product: Transceiver
• Data Rate: 115.2 Kbps
• Wavelength: 875 nm
• Maximum Rise Time: 100 ns
• Maximum Fall Time: 100 ns
• Pulse Width Distortion: 150 us, 1.6 us
• Operating Supply Voltage: 2.4 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 30 C
• Idle Current, Typ @ 25° C: 90µA
• Link Range, Low Power: 1m
• Operating Temperature: -30°C ~ 85°C
• Orientation: Side View
• Shutdown: *
• Size: 9.7mm x 3.7mm x 4mm
• Standards: -
• Supply Voltage: 2.4 V ~ 5.5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PS015105-0702
RXD Receive Data
SD Shutdown
LEDA IRED Driver Anode
This input has an internal pull-down resistor that is disabled (open-circuited)
during shutdown. TXD has integrated digital AC coupling that prevents inadvertent
“always on” IREDs; therefore, no external AC coupling components are required
for input signals between GND and V
(Output, active low).
This output indicates received serial data. It is a tri-state, slew rate controlled
CMOS output (tri-stated during shutdown) driver capable of driving a standard
CMOS or LSTTL load. No external resistor is required.
(Input, active high)
This input is used to place the integrated circuit into shutdown mode. Maximum
current draw in shutdown mode is 1 A. Module shutdown current might be limited
by the choice of capacitor used from V
with very high DC impedance (1–10 G ohm) is required to minimize shutdown
current to nanoamp levels. During shutdown, the output is tri-stated, and the TXD
input pull-down resistor is disabled (open circuited).
(Output, active low).
This output is internally connected to the IRED anode and is connected to LEDA
through a current limiting resistor. Current to the IRED must be limited to a maxi-
mum of 500 mA (20% duty cycle maximum). The maximum voltage on this pad is
limited to +5.5 volts or V
CC
.
CC
CC
.
to ground. A 0.1-mF ceramic capacitor
SIR Transceiver
ZHX1010
3