HFCT-5760ATL Avago Technologies US Inc., HFCT-5760ATL Datasheet - Page 15

• Manufacturer Part Number: HFCT-5760ATL
• Description: Fiber Optic Transmitters, Receivers, Transceivers SM SFP 2X10 LC 155IR 3.3V
• Manufacturer: Avago Technologies US Inc.

Specifications of HFCT-5760ATL

• Function: Singlemode Small Form Factor Pluggable Transceivers with LC Connector.
• Product: Transceiver
• Data Rate: 155 Mbps
• Wavelength: 1300 nm
• Maximum Rise Time: 2.5 ns
• Maximum Fall Time: 2.5 ns
• Operating Supply Voltage: 3.1 V to 3.5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Package / Case: SFP-20
• Optical Fiber Type: TX/RX
• Data Transfer Rate: 155Mbps
• Optical Rise Time: 2.5ns
• Optical Fall Time: 2.5ns
• Operating Temperature Classification: Industrial
• Peak Wavelength: 1360nm
• Package Type: SFP
• Operating Supply Voltage (min): 3.1V
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.5V
• Operating Temp Range: -40C to 85C
• Mounting: Snap Fit To Panel
• Pin Count: 20
• For Use With: Singlemode Glass
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Application Information
The Applications Engineering Group at Avgao is
available to assist you with technical
understanding and design trade-offs associated
with these transceivers. You can contact them
through your Avago sales representative.
The following information is provided to answer
some of the most common questions about the
use of parts.
Optical Power Budget
The worst-case Optical Power Budget (OPB) in
dB for a fiber-optic link is determined by the
difference between the minimum transmitter
output optical power (dBm avg) and the lowest
receiver sensitivity (dBm avg). This OPB
provides the necessary optical signal range to
establish a working fiber-optic link. The OPB
is allocated for the fiber-optic cable length and
the corresponding link penalties. For proper
link performance, all penalties that affect the
link performance must be accounted for within
the link optical power budget.
Process Plug
This transceiver is supplied with a process plug
for protection of the optical port within the LC
connector receptacle. It is made of a high
temperature, molded sealing material that can
withstand +85 °C.
Recommended Cleaning/Degreasing Chemicals
Alcohols: methyl, isopropyl, isobutyl.
Aliphatics: hexane, heptane.
Other: naphtha.
Do not use partially halogenated hydrocarbons
such as 1, 1.1 trichloroethane, ketones such as
MEK, acetone, chloroform, ethyl acetate,
methylene dichloride, phenol, methylene
chloride, or N-methylpyrolldone. Also, Avago
does not recommend the use of cleaners that
use halogenated hydrocarbons because of their
potential environmental harm.
15
LC SFP Cleaning Recommendations
In the event of contamination of the optical
ports, the recommended cleaning process is the
use of forced nitrogen. If contamination is
thought to have remained, the optical ports can
be cleaned using a NTT international Cletop
stick type (diam. 1.25 mm) and HFE7100
cleaning fluid.
Evaluation Kit
An evaluation board (HFBR-0571) is available
via your Avago