NT600SST121BEV3 Omron, NT600SST121BEV3 Datasheet - Page 202

• Manufacturer Part Number: NT600SST121BEV3
• Description: LCD Touch Panels
• Manufacturer: Omron

Specifications of NT600SST121BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: NT600S-ST121B-EV3

190
Data Input
Note
1. If you use a thumbwheel switch to input numeric data, the set data is written
2. With a thumbwheel type numeric setting input field, if n...n t m...m [upper
S The size of a thumbwheel switch can be selected from the following three
S End plates can be displayed at both ends of a thumbwheel switch.
S With a thumbwheel switch, the data input method can be selected as decimal
S For [Decimal] property, specify the position of a decimal point in the numeral to
S In the sign digit, “ ” or “–” is displayed. To set a positive value, specify a blank
sizes.
or hexadecimal.
Decimal selection:
Hexadecimal selection:
be displayed. Numeric data is written to a numeral memory table entry without
a decimal point and input data is stored as an integer.
(“ ”). For a negative value, specify “–.”
When the numeral values entered are confirmed, upper/lower limits
are checked. Otherwise the system may operate unpredictably.
to a numeral memory table entry at each pressing of the + or – key.
This means that the values during data setting are also written to the memory
table.
limit: 1n...n, lower limit: 0m...m (n and m are arbitrary values at each digit)],
carry over and shift to the lower digit are not possible at the highest digit posi-
tion.
Small
Medium
Large
With end plates
Numbers in the range of 0 to 9 can be set at each
digit.
Numbers in the range of 0 to 9 and A to F can be set
at each digit.
Without end plate
CAUTION
Numeral 2341 is written to a
numeral memory table
entry.
Section
6-4