LK202-25-USB-R Matrix Orbital, LK202-25-USB-R Datasheet - Page 39

• Manufacturer Part Number: LK202-25-USB-R
• Description: LCD Character Display Modules Black Background Red Text
• Manufacturer: Matrix Orbital
• Series: LK202-25r

Specifications of LK202-25-USB-R

• Character Count X Line: 20 x 2
• Module Size (w X H X T): 116 mm x 37 mm x 25.73 mm
• Fluid Type: STN
• Voltage Rating: 5 V
• Operating Temperature Range: 0 C to + 50 C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

9.7 Set Auto Repeat Mode
9.8 Auto Repeat Mode Off
Matrix Orbital
Syntax
Parameters
Description
Remembered
Examples
Syntax
Two auto repeat modes are available and are set via the same command:
Resend Key Mode This mode is similar to the action of a keyboard on
Key Up/Down Mode This mode may be used when the typematic
Yes
When the key code associated with key ’P’ (0x50) is pressed, the release
code is ’p’ (0x70). In RS-232 polled mode or via the I
Down / Key Up” codes are used; however, the user should be careful of
timing details. If the poll rate is slower than the simulated auto-repeat it
is possible that polling for a key up code will be delayed long enough
for an unwanted key repeat to be generated.
Hexadecimal
Decimal
ASCII
Parameter
mode
Hexadecimal
Decimal
ASCII
• Resend Key Mode: 0x00
• Key Up/Down Mode: 0x01
a PC. In this mode, when a key is held down, the key code is
transmitted immediately followed by a 1/2 second delay. After
this delay, key codes will be sent via the RS-232 interface at a rate
of about 5 codes per second. This mode has no effect if polling or
if using the I
parameters of the “Resend Key Code” mode are unacceptable or
if the unit is being operated in polled mode. The host system
detects the press of a key and simulates an auto repeat inside the
host system until the key release is detected. In this mode, when a
key is held down, the key code is transmitted immediately and no
other codes will be sent until the key is released. On the release of
the key, the key release code transmitted will be a value equal to
the key down code plus 20 hex.
0xFE 0x7E [mode]
254 126 [mode]
254 “~” [mode]
0xFE 0x60
254 96
254 “‘”
LK202-25-USB
2
C interface.
Length
1
Description
Auto Repeat Mode (0: Resend Key
, 1: Key Up/Down)
2
C, the “Key
35