999396 Weidmuller, 999396 Datasheet - Page 45

• Manufacturer Part Number: 999396
• Description: CONN BLOCK TERM PCB 5.08MM 8POS
• Manufacturer: Weidmuller
• Series: LMr

Specifications of 999396

• Terminal Block Type: Wire to Board
• Number Of Levels: 1
• Positions Per Level: 8
• Pitch: 0.200" (5.08mm)
• Mating Orientation: Horizontal with Board
• Current: 10A
• Voltage: 300V
• Wire Gauge: 14-24 AWG
• Mounting Type: Through Hole
• Termination: Screw - Clamping Yoke
• Features: Side Stacking (Interlocking)
• Color: Black
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 281-1439; LM 5.08/90/8

LPZP 2.54/90
Fig. 1
Fig. 2
Fig. 3
LPZP 2.54/90 adaptor plate to create
optical separation and pitch stepping
(s. fig. 1-3, 9-16) with printed circuit board
versions of 90° and 180° cable entry
orientation with respect to the pcb.
LPZP 1.27/90
Fig. 4
LPZP 1.27/90 adaptor plate to create the
7.62 mm pitch in assembling terminal
blocks in 5.08 mm and 7.62 mm pitch
(s. fig. 2-4) with printed circuit board
versions of 90° and 180° cable entry
orientation with respect to the pcb.
LPZP 2.54/135
Fig. 5
LPZP 2.54/135 adaptor plate to create
optical separation and pitch stepping
(s. fig. 5) with printed circuit board
versions of 135° cable entry orientation
with respect to the pcb.
Application Examples of System LP - Adaptor Plates
LPZP1N 2.54
Fig. 6
Adaptor plate to create optical separations
and pitch stepping of a rear row of LP2N
(s. fig. 6).
Analogous to the rear attachment, a
LPZP 2.54/90 must also be inserted in
the front row.
PCB mounting blocks
LPBB
Fig.
Fig. 8
The LPBB is used for safely attaching
single-row printed circuit board terminals,
with 90° and 180° cable entry orientation
and multiple-row printed circuit board
terminals, to the pcb (s. fig. 7, 8, 10, 12,
14-15). For the 180° versions, only the
LPBB without inserted nut can be used.
7
LPHP
The LPHP fixing plate gives additional
safety to the single-pole LP if it is installed
at the far end of a pcb terminal in order to
produce the pitch 7.62 mm to the next
pole with an adaptor plate.
The fixing plate can easily be shifted onto
the rear dovetails of the pcb terminal
(s. fig. 9, 11, 13 + 16).
Fig. 9
47