PE0SSDSXA Tyco Electronics, PE0SSDSXA Datasheet - Page 3

• Manufacturer Part Number: PE0SSDSXA
• Description: FILTER, INLET, IEC, 10A
• Manufacturer: Tyco Electronics

Specifications of PE0SSDSXA

• Filter Type: Standard
• Current Rating: 10A
• Leakage Current: 500µA
• Approval Bodies: UL, CSA, VDE
• External Depth: 54.1mm
• External Length / Height: 58.67mm
• External Width: 50.29mm
• Input Voltage Max: 250V
• Input: RoHS Compliant

124
P Series
Voltage Selection
The P series of power entry modules provides a dual
voltage selector which is integrated with the fuseholder.
To simplify the wiring in each individual application, Tyco
Electronics provides dedicated voltage selectors for
different voltage selection schemes. The two most popular
schemes are the parallel and serial for dual primary
transformers and the “DPST switch” for switching mode
power supplies (jumper types.) P series products with an
“S” as the fifth digit are specifically designed for “jumper”
type applications associated with switching mode power
supplies.
P series products with an “X” as the fifth digit are specifi-
cally designed for dual primary transformer applications.
The voltage selector installed will allow proper wiring from
these applications. No matter what voltage selection
scheme is used, wiring is always made to the same four
terminals.
Fuseholder
Another feature of the P series power entry module is a ver-
satile fusing arrangement. Its fuseholder can hold two 1/4”
x 1-1/4” or 5 x 20mm fuses. It can also be converted to
accept one fuse with a conversion clip that bridges one of
the two fuse chambers.
The conversion clip is installed on the P Series power entry
modules set for single fusing (those with part numbers with
an “S” as the sixth digit). Units with a “D” as the sixth digit
do not include a conversion clip.
Interconnection Block
Installation of the unfiltered versions of the P series involves
wiring of the IEC socket to the switch and the switch to the
fuseholder. Labor can be eliminated by ordering the
product with an interconnection block. This feature,
designated by a BX in the seventh and eighth digits,
prewires the module for easier installation. The wiring is
protected with the plastic case to better prevent access to
the terminals and connections.
Wiring can be further simplified by ordering a PA100
connector assembly. See page 131 for accessories.
The dimensions of this alternative are the same as the
filtered versions.
Catalog 1654001
Revised 03-04
A Shield
Dimensions are in inches and
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
CORCOM Product Guide
The CHAMELEON Adaptable Module for General, High Performance or
Medical Applications
B Shield
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
(Continued)
Filter Options
Four filtering options are available in three current ratings.
S models (those with an S as the seventh digit) provide
general purpose filtering for both line-to-ground and line-
to-line noise. The increased inductance of the P series
allows better performance than most power entry modules
on the market. The S models will generally allow
compliance with FCC limits for linear power supplies.
The high-performance Z models are available for general
applications requiring higher attenuation.
The H models greatly reduce line-to-ground capacitance
in compliance with UL 544 low leakage current
specification.
The high-performance L models are available for medical
applications requiring higher attenuation.
Electrical Schematics
H Model
S Model
L Model
Z Model
Shield
A new feature available on the P series is an RF shield.
The metal shield, available on filtered models, provides
shielding from radiated emissions and provides an
additional RF ground for the filter to the case.
The shield is available in two versions, a shield of the filter
components (designated by A as the ninth digit) and a
complete shield (designated by B as the ninth digit).
The A shield covers the filter portion of the module and
increases performance of the filter by protecting the
components from magnetic coupling. This shield improves
RF ground connection to the case while still allowing the
use of the P Series extender.
The B shield covers the entire power entry module with
metal, protecting the equipment from all radiated noise.
Used with the filter, the shield provides the most secure
protection from RFI noise problems. The B shield cannot
be used with any extender.
LINE
LINE
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
Germany:
1-508-992-4495
49-89-6089-0
www.cor.com
www.tycoelectronics.com
LOAD
LOAD