B84114DB30 EPCOS Inc, B84114DB30 Datasheet - Page 9

• Manufacturer Part Number: B84114DB30
• Description: FILTER, 3A, CHASSIS
• Manufacturer: EPCOS Inc

Specifications of B84114DB30

• Filter Type: Standard
• Current Rating: 3A
• Leakage Current: 0.5mA
• Capacitance: 470nF
• Inductance Min: 5.6mH
• Svhc: No SVHC (18-Jun-2010)
• Approval Bodies: EN133 221, CSA, UL
• Capacitance X Type Capacitor: 0.47µF
• Voltage Rating: 250 VAC / 250 VDC
• Mounting Style: Screw
• Termination Style: Tab Connector
• Termination Type: Tab
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Important information
Please read all safety and warning notes carefully before installing the EMC filter and putting it into
operation (see
are not removed nor their legibility impaired by external influences.
Death, serious bodily injury and substantial material damage to equipment may occur if the appro­
priate safety measures are not carried out or the warnings in the text are not observed.
Using according to the terms
The EMC filters may be used only for their intended application within the specified values in low­
voltage networks in compliance with the instructions given in the data sheets and the data book.
The conditions at the place of application must comply with all specifications for the filter used.
■
■
■
■
■
EMC filters
Cautions and warnings
It shall be ensured that only qualified persons (electricity specialists) are engaged on work such
as planning, assembly, installation, operation, repair and maintenance. They must be provided
with the corresponding documentation.
Danger of electric shock. EMC filters contain components that store an electric charge. Danger­
ous voltages can continue to exist at the filter terminals for longer than five minutes even after
the power has been switched off.
The protective earth connections shall be the first to be made when the EMC filter is installed and
the last to be disconnected. Depending on the magnitude of the leakage currents, the particular
specifications for making the protective-earth connection must be observed.
Impermissible overloading of the EMC filter, such as impermissible voltages at higher frequen­
cies that may cause resonances etc. can lead to destruction of the filter housing.
EMC filters must be protected in the application against impermissible exceeding of the rated
currents by suitable overcurrent protective.
Warnings
). The same applies to the warning signs on the filter. Please ensure that the signs
9
01/06