97F9851 GENTEQ, 97F9851 Datasheet - Page 12

• Manufacturer Part Number: 97F9851
• Description: CAPACITOR MOTOR RUN 45/5UF, 440VAC, CASE T
• Manufacturer: GENTEQ
• Series: Life-Liner

Specifications of 97F9851

• Capacitance 1: 45µF
• Capacitance 2: 5µF
• Voltage Rating: 440VAC
• Capacitor Dielectric Type: Polypropylene
• Capacitance Tolerance: ± 6%
• Capacitor Mounting: Quick Connect
• Lead Spacing: 20.57mm
• Capacitance: 45 μF,5 μF
• Material, Element: Polypropylene Metallized
• Special Features: Motor Run
• Termination: Quick Connect
• Tolerance: ±6 %
• Voltage, Rating: 440 VAC
• Capacitance, Dual: 45 / 5 UF
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Capacitor Diagnosis Support
(CoNTINueD)
CAPACITANCe TeST
This test will determine the actual capacitance and is the best test to
determine whether the capacitor is good, weak or failed. Any singe or multi-
purpose tool that can provide an analog or digital readout of microfarads
(mf) is suitable for this test. However, it should be understood that these
tools may typically read from 1-5% higher than the actual capacitance as
measured by the manufacturer of the capacitor.
Using a capacitance meter, set to the appropriate scale. If applicable,
connect the leads of the meter across the terminals of the capacitor. on dual
run capacitors, check (C) to (FAN) or (C) to (HERM) as two separate checks.
Wait a few seconds for the reading on the meter.
Most capacitor manufacturers and HVAC OEMs specify ± 6% tolerance on
microfarads (mf) of the capacitor. If the reading falls outside of this range
and fails to meet the oEM designed operating performance, then it should
be replaced.
CAP3001 Rev 5/09
- 13 -
www.RegalBeloitCapacitors.com