BFC237138683 Vishay, BFC237138683 Datasheet - Page 15
BFC237138683
Manufacturer Part Number
BFC237138683
Description
CAPACITOR POLYESTER 0.068UF, 63V, RADIAL
Manufacturer
Vishay
Series
MKT371r
Datasheet
1.BFC237178104.pdf
(28 pages)
Specifications of BFC237138683
Capacitor Dielectric Type
Polyester
Capacitance Tolerance
± 10%
Voltage Rating
63VDC
Capacitor Case Style
Radial Leaded
No. Of Pins
2
Capacitance
0.068µF
Tolerance
10 %
Termination Style
Radial
Dimensions
2.5 mm W x 10 mm L x 6.5 mm H
Lead Spacing
7.5 mm
Operating Temperature Range
0 C to + 85 C
Product
Metallized Polyester Film Capacitors
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
MKT371, MKT372, MKT373
DC Film Capacitors
Vishay BCcomponents
MKT Radial Potted Type
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information:
www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that stand-off pips are in good contact with the printed-circuit
board:
• For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements On Printed-Circuit Board
The maximum space for length (I
), width (W
) and heigth (h
) of film capacitors to take in account on the printed-circuit
max.
max.
max.
board is shown in the drawing:
• For products with pitch ≤ 15 mm, Δw = Δl = 0.3 mm and Δh = 0.1 mm
• For products with 15 mm < pitch ≤ 27.5 mm, Δw = Δl = 0.5 mm and Δh = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
= W + Δ
W
max.
Eccentricity
= I + Δ
I
CBA116
max.
= h + Δ
h
max.
Seating plane
SOLDERING
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”:
www.vishay.com/doc?28171
Storage Temperature
•
Storage temperature: T
= - 25 °C to + 40 °C with RH maximum 80 % without condensation
stg
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 °C ± 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
www.vishay.com
For technical questions, contact:
dc-film@vishay.com
Document Number: 28109
108
Revision: 22-Dec-10