FD14-187C 3M, FD14-187C Datasheet - Page 2
![no-image](/images/manufacturer_photos/0/0/1/3m_sml.jpg)
FD14-187C
Manufacturer Part Number
FD14-187C
Description
TERMINAL, FEMALE DISCONNECT 0.187IN BLUE
Manufacturer
3M
Series
Highlandr
Datasheet
1.FD14-187C.pdf
(2 pages)
Specifications of FD14-187C
Connector Type
Female Disconnect
Termination Method
Crimp
Stud/tab Size
0.187 X 0.02"
Wire Size (awg)
16-14
Contact Material
Brass
Contact Plating
Tin
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Engineering Specification
Crimp-Type Female Disconnect Terminals shall,
electrically and mechanically connect permanently to
the prestripped end of a stranded copper wire: and
have a tongue portion with fingers which grip a Male
Disconnect in a separable, reusable manner, forming a
Quick Connect Wiring Termination.
The connector line shall offer a tongue variations
(sized to grip male tabs: 0.187˝ or 0.250˝) and barrel
variations in construction (non-insulated, nylon
insulated with insulation grip, etc.). The tongue
portion shall be marked with the wire range and
manufacturer’s symbol ( ).
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
3M and Scotchlok are trademarks of 3M
The Non Insulated Female Disconnect shall be tin
plated 0.016˝ thick brass, with a tongue for gripping a
0.187˝ male tab of 0.20˝ thickness, and a butted seam
barrel sized for specified (AWG) wire range (22-18,
16-14).
Non-Insulated connectors shall be UL Listed and CSA
Certified. Female Disconnects shall be suitable for
field or factory wiring, with a UL Recognized strain
relief required.
© 3M 2002 78-8126-0637-0-A
Litho in USA.