5738 Pomona Electronics, 5738 Datasheet - Page 67

• Manufacturer Part Number: 5738
• Description: RF/COAXIAL ADAPTER, N JACK-COUPLING NUT
• Manufacturer: Pomona Electronics

Specifications of 5738

• Connector Type: Inter Series Coaxial
• Body Style: Straight Adapter
• Convert From Connector: N Coaxial
• Convert From Gender: Jack
• Convert To Connector: N Coaxial
• Contact Material: Phosphor Bronze
• Accessory Type: Female Connector
• Equipment Type: Test Connectors, Probes and Testleads
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: 501-1034 Universal Adapter Kit (Model 5698)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 5738PO

Create Your Own Test Leads for Your Own
Specific Needs with the Following:
Test Lead Wire with
Silicone or PVC
Insulation
Do-It-Yourself 4mm
Right Angle Banana Plug
Do-It-Yourself 4mm
Stackable Banana Plug
Do-It-Yourself In-Line Sheathed (4mm) Banana Plug and Jack
*see rating message at start of section.
2.3in (58.4mm)
(32.4mm)
1.28in
3.01in (76.45mm)
• 50ft (15.2m) of unterminated 18 AWG
• Choose from heat-resistant silicone or
• Very flexible with 65 strands of 36 AWG
• Create your own test leads with the
• Wide temperature range of -58 to 302°F
*Std. Colors: -0 Black, -2 Red.
See pages 30-31 for more do-it-yourself
plugs.
Build your own safety leads with do-it-
yourself safety-sheathed 4mm right-angle
banana plug.
Material: Contacts: nickel-plated brass;
Insulation: lucel acetal polymer.
Rating: IEC61010 1000V Category III**,
20A, 14 to 131°F (-10 to +55°C).
*Std. Colors: -0 Black, -2 Red.
** When plug is correctly assembled and
terminated.
Build your own safety stacking leads with
do-it-yourself safety-sheathed 4mm stack-
able banana plugs.
Material: Contacts: nickel-plated brass,
Insulation: lucel acetal polymer.
Rating: IEC61010 1000V Category III**,
20A, 14 to 131°F (-10 to +55°C).
*Std. Colors: -0 Black, -2 Red.
** When plug is correctly assembled and
terminated.
Model# 6729
Model# 6721
Model#
6733-*
6734-*
test lead wire 50ft (15.2m lengths only.)
PVC insulation.
tinned copper conductor.
adapters shown below.
(-50 to 150°C) with PVC insulation.
*Color Code: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow,
DMM Accessories and Kits
6383
6384
Insulation
Type
Silicone
PVC
-5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White
Length
50ft (15.2m)
50ft (15.2m)
(36.58mm)
1.44in
Kelvin Probes
Kelvin Lead Set with
Kelvin Clips
Kelvin Clip Set
• Safety-rated plugs and
• Plugs fit most sheathed
See mating panel jacks
(6387 on page 33).
Material: Banana Plug/Jack:
brass; Spring: heat treated
beryllium copper; Insulation:
Santoprene
jacks for use with any wire
from 22 to 18 AWG with
flexible insulation.
DMM jacks and DMM test
leads to make up your
own banana plug or jack
test lead or jumper.
www.pomonaelectronics.com
®
.
For 4-wire and 2-wire measure-
ments.
Patented design for high precision
rapid testing.
Gold-plated for accuracy.
Easily move from one test point to
another for rapid readings.
For use with 4-wire Kelvin meters
such as Agilent 34401A, and 3458A.
Rating: For CE compliance and for
personal safety, do not hold in hand
when voltages exceed 33 Vrms/
70 Vdc.
Length: 48in (122cm)
• Gold-plated Kelvin clip jaws
• Silicone insulated 3.3ft (1m)
• Safety sheathed straight DMM
• Clips firmly grip test points for
Rating: CAT III 1000 V.
Two gold-plated clips connect to
test points for 4-wire
resistive measurement.
Clips open to 0.25in (6.35mm)
maximum.
Gold-plated plugs and clips.
Rating: For CE compliance and
for personal safety, do not hold in
hand when voltages exceed
33 Vrms/70 Vdc.
Overall Length: 26.5in (67.3cm).
Model# 6303
Model# 6730
Model# 5940
allow 4-wire resistive measure-
ments.
test lead.
plugs for convenient bench use.
low-loss connection.
Attaches to wire by crimp or
soldering.
Rating: IEC61010 CAT II
300V, 15A, +275°F (+135°C)
max.
*Std. Colors: -0 Black,
-2 Red, -02 Black and Red
(2 per pkg).
*Sold in pkgs of 10.
Model #
6383-*
6383-02
6384-*
6384-02
Plug
Jack
67