AT04-3P-MM01 Amphenol Sine Systems Corp, AT04-3P-MM01 Datasheet - Page 14

• Manufacturer Part Number: AT04-3P-MM01
• Description: Plug And Socket Connector Housing
• Manufacturer: Amphenol Sine Systems Corp

Specifications of AT04-3P-MM01

• No. Of Positions: 3
• Connector Mounting: Cable
• No. Of Contacts: 3
• Connector Type: Plug & Socket
• Features: End Cap & Reduced Diameter Seal (0.053" - 0.120")
• For Use With: AT Series Connectors

11
Contact and Wedge Insertion
1. Grasp crimped contact approx. one
Contact and Wedge Removal
1. Remove wedge by inserting a fl athead
Plug Assembly
4. Insert wedge into connector.
inch behind the contact barrel.
screwdriver head underneath the lip
of the wedge.
2. Hold connector with rear grommet
5. A ‘click’ will be felt when the wedge is
2. Twist the fl athead screwdriver until
facing you.
wedge ‘pops’ out of connector.
fully installed.
3. Push contact straight into connector
3. Use the same fl athead screwdriver to
until a ‘click’ is felt. A slight tug will
confi rm placement.
remove contact inside connector.