FH28E-60S-0.5SH(05) HRS (HIROSE), FH28E-60S-0.5SH(05) Datasheet - Page 11

• Manufacturer Part Number: FH28E-60S-0.5SH(05)
• Description: FFC/FPC CONNECTOR, RECEPTACLE 60POS 1ROW
• Manufacturer: HRS (HIROSE)

Specifications of FH28E-60S-0.5SH(05)

• Gender: Receptacle
• Pitch Spacing: 0.5mm
• No. Of Contacts: 60
• No. Of Rows: 1
• Contact Plating: Gold
• Ffc/fpc Thickness: 0.3mm
• Connector Type: FFC / FPC
• Contact Termination: Surface Mount Right Angle
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Precautions (mating/un-mating FPC with the retention tabs)
1.How to insert
2.Precautions when mating /un-mating
1
Insert the cable into the interspace between the
mold walls (
the connector is inserted and the guide walls (
at both ends of interior connector so the cable tabs
are properly located.
Avoid insertion in diagonal direction.
A part of the connector may touches the contacts
resulting in deformation of the contacts.
After insertion, slightly pull the cables to make sure
the cable tabs are firmly secured. No removal of the
cable means correct insertion.
Do not insert the cable in diagonal direction.
Insert the cable straight into the connector and
hook the cable tabs with the guide.
2
FH28 Series 0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
) at both ends of entrance where
Operation
1
3
Close the actuator.
)
2
Avoid “ride on”
Precautions
11