DL3-60P ITT Cannon, DL3-60P Datasheet - Page 9

• Manufacturer Part Number: DL3-60P
• Description: PROTECTIVE COVER DL SERIES ZIF CONNECTOR
• Manufacturer: ITT Cannon

Specifications of DL3-60P

• Gender: Plug
• No. Of Contacts: 60
• Contact Gender: Pin
• Connector Mounting: Cable
• Contact Termination: Crimp
• Body Material: Thermoplastic
• Connector Type: Rectangular Power
• Connecting Termination: Wire Crimp
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8
ZIF Connectors
DL/DLM Product Features
The long life and rapid mating are achieved through
the use of our Zero Insertion Force design.
Contacts in the plug and receptacle do not touch
each other while the connector halves are being
engaged.
It’s as easy as 1, 2, 3...
Step 1. The plug is placed over the receptacle.
Step 2. A ‘‘quarter turn’’ of an actuating shaft
mates all the contacts at once.
Step 3. The ‘‘same quarter’’ turn also physically
locks the connector halves together.
Connector engagement force is zero, and the only
wear on the contacts occurs as they are pressed
together and lightly wiped past each other during
the camming and locking operation.
*Contact Cannon for details.
High pin count:
60, 96, 156, 260, 360, 624, 1248* or 2496*
contact positions.
Variety of contacts:
– Crimp
– Square Post
– Wrap Post
– Buss
– PC/RC
Metal or plastic housing.
Wide range of accessories.
Easy actuation by screwdriver, socket wrench
(DL1/2/3 only), allen wrench or actuating
handle (see accessories page 47).
Step 2. Turn the cam a quarter turn.
Step 3. It’s locked and mated.
Zero Insertion Force Camming Instructions
This is our ‘‘DL/DLM’’ series of connectors.
Step 1. Simply place it together.
Contacts aligned.
Contacts engaged.
Contacts are mated.
Dimensions are shown in mm (inch)
Dimensions subject to change
DL/DLM