1357 5 OZ 3M, 1357 5 OZ Datasheet - Page 2

• Manufacturer Part Number: 1357 5 OZ
• Description: ADHESIVE, TUBE, 5OZ
• Manufacturer: 3M

Specifications of 1357 5 OZ

• Color: Gray/Green
• Dispensing Method: Tube
• Weight: 5oz
• Body Material: 5 Oz Tube
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Handling and Application Information
* If 'Directions for Use' reference P.N.'s 08984, 08986, or 08987, please read. Federal and local air quality regulations may regulate
or prohibit the use of surface preparation and cleanup solvents based on VOC content. Consult your local and Federal air quality
regulations for information. When using solvents, use in a well ventilated area. Extinguish all sources of ignition in the work area
and observe precautionary measures for handling these materials. Refer to product label and MSDS for P.N. 8984, 8986, or 8987
for detailed precautionary information.
Store at room temperature. Rotate stock on a "first-in-first-out"
basis. When stored at the recommended conditions in original,
unopened containers, this product has a shelf life of 12 months.
Refer to Product Label and Material Safety Data Sheet for Health and Safety Information before using this product.
Country
US
This document is public. It may be distributed.
This product will be free from defects in material and workmanship at the time of shipment. 3M MAKES NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR PARTICULAR PURPOSE. User is responsible for determining whether the 3M product is fit for a particular purpose and
suitable for user’s application. If this product is defective, your exclusive remedy and 3M’s and seller’s sole obligation shall be, at
3M’s option, to replace the product or refund the purchase price.
LIMITATION OF LIABILITY: 3M and seller will not be liable for any loss or damage arising from this 3M
product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
3M Automotive After Markets
3M Center, Building 223-6N-01
Saint Paul, MN 55144-1000
1-877-666-2277 (1-877-MMM-CARS)
2
Bonding Range (Cloth to Enamel Paint)
Softening Point
Staining (200 Hour S-1 Lamp)
Cold Brittleness
Heat Aging (14 Days @ 160
Clean surfaces to remove dust, dirt, grease, oil, etc. This can be done with 3M™ General Purpose
Adhesive Cleaner, PN's 8984, 8986, and 8987. Apply a thin coat of adhesive to each surface and allow
to dry until it becomes quite tacky. Press surfaces together to insure intimate contact.
To bond thin weight fabric, apply adhesive only to metal or painted surface. Allow adhesive to dry, then
press fabric onto adhesive.
Cleanup - Excess adhesive may be removed with 3M™ General Purpose Adhesive Cleaner.
Tacking into place of trim fabric, upholstery cloth, floor mats and carpeting.
Holding gaskets in place while assembling parts.
Performance Properties
Directions for Use
Applications
Storage and Handling
Precautionary Information
Warranty and Limited Remedy
For Additional Health and Safety Information
°
F)
30 Seconds-5 Minutes
175
Very Slight
25 psi minimum shear strength
°
F Minumum
10
°
F - No Failure