BR1225T2-B RAYOVAC, BR1225T2-B Datasheet - Page 25

• Manufacturer Part Number: BR1225T2-B
• Description: LITHIUM BATTERY, 3V
• Manufacturer: RAYOVAC

Specifications of BR1225T2-B

• Battery Capacity: 50mAh
• Battery Voltage: 3V
• Battery Technology: Lithium
• Battery Terminals: Tab
• External Diameter: 12.5mm
• External Height: 2.5mm
• Battery Neda Code: 5020LB
• Outer Diameter: 12.5mm
• Voltage Rating: 3V
• Lead Free Status / RoHS Status: na

XIII. U.L. Component Recognition
Rayovac BR Lithium batteries have been accepted
by Underwriters Laboratories under their
Component Recognition Program and carries U.L.
File Number MH 12542. All recognized Lithium
batteries can be identified by the
located on the data sheet.
For use in UL listed devices, these Lithium batteries
must be used in accordance to the following U.L.
conditions of acceptability.
A. Conditions of Acceptability
The use of these cells may be considered generally
acceptable under the conditions given below:
1. The cells are identified with producer’s name and
B. Protective Battery Circuits
model designation on the cell.
V
cc
Transistor
Diode or
Protective Redundant Diodes
Switch
B1
D1
D2
symbol
For D1/D2 use Silicon diodes. Do not use low power Schottky diodes.
Circuit
25
2. These cells are intended for use as
3. These cells are intended for use at ordinary
4. These cells can be used in series up to a
V
cc
components in devices where servicing of the
circuitry involving the cells and replacement of
the Lithium cells will be done by a trained
technician.
temperatures where anticipated high
temperature excursions are not expected to
exceed 100°C (212°F).
maximum of four cells of the same model
number. When used in series, they should all be
replaced at the same time using fresh cells
only. These cells should not be connected in
series with any other (other than the allowed
number of cells in series) power source that
would increase the forward current through
the cells.
Protective Diode and Limiting Resistor
Transistor
Diode or
Switch
B1
D1
R1
Circuit