22-506 GC Electronics, 22-506 Datasheet - Page 6

• Manufacturer Part Number: 22-506
• Description: PCB, Tracks(Strip Board)
• Manufacturer: GC Electronics

Specifications of 22-506

• Board Type: PCB, Pre-etched Pattern
• Board Material: FR-2
• External Height: 152.4mm
• External Width: 88.9mm
• Board Thickness: 1.57mm
• Hole Diameter: 0.889mm
• Peak Reflow Compatible (260 C): No
• Body Material: Phenolic
• Leaded Process Compatible: No
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

CHEMICALS
Print Kote
Conformal Coating
The ultimate coating for PC boards. Provides a
protective
contaminants. Prevents arcing and shorting. Air dry
15-30 minutes. May be baked at 200°C for 30-60
minutes for extreme high temperature applications.
Part No. 22-203
N.S.N. 8010-00-711-2173
Part No. 22-045
Silver Print II
Conductive Paint
Bottle for PC repair or add-on circuit traces. Pure
silver in acrylic lacquer based carrier may be
brushed on for either conductors or shielding.
Connections have equal or better conductivity than
copper (0.1 ohms per square).
Part No. 22-023
Part No. 22-024
Nickel Print
Conductive Paint
A
pigmented with powdered nickel. For repair and
modification of printed circuits. Conductivity is
5 to 6 ohms per square.
Part No. 22-207
Print Kote Solvent
A solvent to remove silicone and other types of
protective coatings from PC boards. Required when
modifying PC boards or replacing components
where the protective coating interferes with the
desoldering and resoldering operation.
Part No. 22-209
N.S.N. 6810-00-711-2185
quick
shield
drying
For the latest information–www.gcelectronics.com
2 fl. oz. Bottle
11 oz. Aerosol
Replaces Part No. 22-245
1/2 troy oz. Bottle
1 troy oz. Bottle
2 fl. oz. Bottle
2 fl. oz. Bottle
Replaces Part No. 22-202
Replaces Part No. 22-201
All quantities are single; BU’s are packages of 10 Unless otherwise noted.
to
lacquer-based
resist
environmental
coating,
PRINTED CIRCUIT BOARD REPAIR
Flux Remover
and Cleaner II
Convenient, fast and easy to use. Removes all
types of organic flux. Pinpoint applicator
supplied. Non ODC.
Part No. 22-271
Etch Resist Lacquer
For touch-up or modification of resist patterns
before etching. Fast drying, easy to apply on PC
boards. Bottle is supplied with small brush
attached to cap.
Part No. 22-244 1/2 fl. oz. Bottle
Stripping Solution
Removes remaining etch resist from PC boards.
Removes any coating that remains over the
copper after etching which may interfere with
the soldering of the component leads to the PC
board.
Part No. 22-240
Part No. 22-682
N.S.N. 3439-00-986-2582
N.S.N. 5999-00-755-1808
Kit contains:
1—Solder Aid Tool Part No. 9093
1—Low-Melt Solder Part No. 9132
1—PC Repair Foil
1—Print Kote Part No. 22-203
1—Print Kote Solvent Part No. 22-209
1—Fiberglass Eraser
1—Tweezers Part No. 7948
Asst. Solder Washers (Fluxed)
Small Printed Circuit
Repair Kit
For repair and servicing of printed
circuits
16 oz. Aerosol
2 fl. oz. Bottle
63