SK-FR-144PMC-91467B Fujitsu, SK-FR-144PMC-91467B Datasheet - Page 9

• Manufacturer Part Number: SK-FR-144PMC-91467B
• Description: Low Cost Fujitsu FR Evaluation Board
• Manufacturer: Fujitsu

Specifications of SK-FR-144PMC-91467B

• Silicon Manufacturer: Fujitsu
• Features: UART-Transceiver, USB To Serial Converter
• Kit Contents: Board, Cable, CD
• Silicon Core Number: MB91460
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Fujitsu Microelectronics Europe - http://emea.fujitsu.com/microelectronics
The Hardware
JP3: DTR-Reset
Set the jumper to 1-2 to connect
the DTR-Signal
of the UART connector to the
microcontroller reset-pin.
Set the jumper to 2-3 to connect
the DTR-Signal
of the USB connector to the
microcontroller reset-pin.
Some terminal-programs, e.g.
Fujitsu‘s Skwizard, allow to reset
the evaluation board by using the
DTR-Signal.
The jumpers
JP4: UART RX select
R-0: UART4=UART‘A‘ / U-1: UART5=UART‘B‘ (USB)
R-1: UART5=UART‘A‘ / U-0: UART4=UART‘B‘ (USB)
JP12: 5V / 3.3V
5V: 5V is used for ext. Bus I/F
3V3: 3.3V is used for ect. Bus I/F
JP10: 5V / 3.3V
5V : 5V is used for IO supply
3V3: 3.3V is used for IO supply
JP5: UART TX select
R-0: UART4=UART‘A‘ / U-1: UART5=UART‘B‘ (USB)
R-1: UART4=UART‘A‘ / U-0: UART5=UART‘B‘ (USB)
All Rights Reserved.© Fujitsu Limited 2007
JP11: Power Supply
USB: USB supply is used
Ext: External supply is used
9