DM163035+TEFLCST3 Microchip Technology, DM163035+TEFLCST3 Datasheet - Page 53

• Manufacturer Part Number: DM163035+TEFLCST3
• Description: KIT, PICDEMLAB+FLOWCODE-HOME BUNDLE/
• Manufacturer: Microchip Technology

Specifications of DM163035+TEFLCST3

• Kit Contents: Component Kit, PICDEM Lab Development Board, PICkit 2 Programmer/ Debugger, CD Containing User Guide
• Svhc: No SVHC (15-Dec-2010)
• Development Tool Type: Hardware / Software - Dev
• Silicon Manufacturer: Microchip
• Core Architecture: PIC
• Core Sub-architecture: PIC10, PIC12, PIC16
• Silicon Core Number: PIC10F, PIC12F, PIC16F
• Silicon Family Name: PIC10F2xx, PIC12F6xx, PIC16F6xx
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

© 2009 Microchip Technology Inc.
5. The switch component automatically defaults to connect to the PORTA register
FIGURE 2-45:
Click Apply and then OK to close the window.
6. The switch component should now only show one switch. This switch is
pins. However, this application will only make use of a single switch. Therefore,
the switch component will need to be modified. Click on the small button on the
component, as shown in Figure 2-44, and select Properties... from the
drop-down menu. In the Edit Component Properties window, change the
“Number of Switches:” to one using the drop-down menu. Flowcode features the
ability to set-up a “Debounce(ms)” for any push buttons/switches used in the
application, thereby minimizing the amount of code the user needs to create. As
per the previous discussion, set the “Debounce(ms)” to 5mS (see Figure 2-45).
connected to PORTA<RA0>. To configure the switch to be connected to the RA2
pin, once again select the properties drop-down menu as per step 5, only this
time selecting Component Connections... In the Specify Component Pin
Connections window, select Bit: 2 from the appropriate drop-down menu. The
window should now resemble Figure 2-46.
General Purpose Input/Output Labs
CONFIGURING THE NUMBER OF SWITCHES AND
DEBOUNCE TIME
DS41381A-page 49