EM-STM3210E EMBEST, EM-STM3210E Datasheet - Page 4

• Manufacturer Part Number: EM-STM3210E
• Description: STM32F103ZE ARM-CM3 Board
• Manufacturer: EMBEST

Specifications of EM-STM3210E

• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: Cortex-M3
• Features: USB, CAN, SD Card Interface, TFT-LCD, RS232 Serial Interface, Four 26-pin User Extended Interface
• Silicon Core Number: STM32
• Silicon Family Name: STM32F1xx

install the following products on your pc:
7. Technical Data
8. Test this board
(1) Start the PC
(2) Connect relevant devices
(3) When the board electrifies, press the Reset button on the board, then watch the
phenomenon displaying on the LCD screen
(4) Start the hyperterminal on the PC, press the Reset button on the board again, will you
see the phenomenon displaying on the hyperterminal, and then run relevant programs
according to the instructions refered on the hyperterminal.
9. What is in the CD-ROM?
(1) Documents -- user manual, data sheet and the other development document.
(2) Images -- image files for this product.
(3) Software -- software programs or this product.
(4) Tools -- the utilities tools and software.
Keil UVision IDE
You can purchase the Keil UVision IDE, such as RealView MDK-ARM from Keil
Corporation, or you can also download the evaluation version of RealView MDK for free
of charge. Of course, you can use other IDE as well, such as IAR EWARM, but we suggest
you using Keil UVision IDE, then you can use the example programs we provide in
CD-ROM, otherwise, they would be useless.
Example programs written for the STM32F103ZE . These example programs are stored
in the CD-ROM accompany with the STM32F103ZE board.
Connect COM1 interface of the board to the COM interface of the PC by using a serial
port cable for the information display and input;
Connect the PC’s USB port to the USB port on board by using a USB cable for USB
communication and power supply; the power LED lights when power is applied to the
board.
XTAL Frequency
Supply Voltage
Supply Current
Microcontroller
Parameter
Peripherals
Board Size
5 Volts DC (provided by the USB bus of a PC)
180mA typical, 200mA maximum
8 MHz
STMicroelectronics STM32F103ZE
1 × RS232 Interface,
1 × CAN Interface,
1 × USB Interface,
1 × Color graphic display (240x320),
1 × MicroSD Memory Card connector,
1 × JTAG Interface,
4 × Push buttons (Reset, Wake Up, Tampering, User),
1 × Joystick (5-position),
1 × Analog Input (connected to potentiometer),
1 × Analog Output (connected to speaker by default)
110mm x 140mm (4.33" x 5.5")
Description
www.embedinfo.com/en
4/4