USB-COM485-PLUS-2 FTDI, USB-COM485-PLUS-2 Datasheet - Page 2

• Manufacturer Part Number: USB-COM485-PLUS-2
• Description: MODULE, DEV, USB-RS485, 2 COM PORT
• Manufacturer: FTDI
• Type: Developmentr

Specifications of USB-COM485-PLUS-2

• Mcu Supported Families: FT232R, FT2232, FT232BM
• Kit Features: Works With USB 1.1 & 2.0 Host And Hub Ports, FIFO
• Svhc: No SVHC (18-Jun-2010)
• 2.0 Host And Hub Ports, Fifo: 4KB Transmit Buffer, 4KB Receive Buffer
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Document Reference No.: FT_000136
USB-COM485-PLUS2 Datasheet
Version 1.2
Clearance No.: FTDI#104
1
Introduction
1.1
Functional Description
The USB-COM485-PLUS2 is a USB to a dual interface RS485 level serial UART adaptor incorporating
FTDI’s FT2232H Hi-Speed USB2.0 (480Mb/s) to dual serial UART interface IC device. The FT2232H
handles all the USB signaling and protocols. The adaptor provides a fast, simple way to connect devices
with an RS485 interface to USB.
USB-COM485-PLUS2 is a USB to a dual-port RS485 adapter.
The integrated electronics of the USB-COM485-PLUS2 utilise the FTDI FT2232H and includes RS485 level
shifters plus TXD/RXD LEDs to provide a visual indication of data traffic through the module.
Figure 1.1 USB-COM485-PLUS2
The module uses a standard USB-B device connector for connection to an upstream host or hub port.
RS485-level signals are available on an industry-standard DE-9P connector. The maximum RS485-level
data rate is 10Mbps.
The USB-COM485-PLUS2 module requires USB device drivers, available free from www.ftdichip.com,
which are used to make the USB-COM485-PLUS2 appear as a Virtual COM Port (VCP). This allows existing
serial communications software, such as HyperTerminal, to exchange data through the USB-COM485-
PLUS2 to a legacy RS485 peripheral device.
Copyright © 2010 Future Technology Devices International Limited
1