USB-COM422-PLUS-4 FTDI, USB-COM422-PLUS-4 Datasheet - Page 10

• Manufacturer Part Number: USB-COM422-PLUS-4
• Description: MODULE, DEV, USB-RS422, 4 COM PORT
• Manufacturer: FTDI
• Type: Developmentr

Specifications of USB-COM422-PLUS-4

• Mcu Supported Families: FT232R, FT2232, FT232BM
• Kit Features: Works With USB 1.1 & 2.0 Host And Hub Ports, FIFO
• Svhc: No SVHC (18-Jun-2010)
• 2.0 Host And Hub Ports, Fifo: 2KB Transmit Buffer, 2KB Receive Buffer
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5) Wait while the driver is found, downloaded, and installed. This step may take a couple minutes.
6) After the files are found and installed, click “Finish” to complete the installation.
7) Steps 2 through 6 will repeat. The first time installs the basic USB Serial Converter in the USB
8) When both portions of the device driver have been installed successfully, the following message
Figure 2.3 – Automatic Install
Figure 2.4 - Complete Hardware Installation
device tree. The second time installs the Virtual COM Port layer in the Ports tree and assigns the
COM port number. You must install the Virtual COM Port layer four times, because the USB-
COM422-PLUS4 has four Virtual COM Ports.
will appear, indicating that the device is ready.
Copyright © 2010 Future Technology Devices International Limited
Document Reference No.: FT_000152
USB-COM422-PLUS4 Datasheet
Clearance No.: 107
Version 1.1
9