5075 ACL Staticide Inc, 5075 Datasheet - Page 6

• Manufacturer Part Number: 5075
• Description: Static Protection
• Manufacturer: ACL Staticide Inc

Specifications of 5075

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6
#6300 / 6400
ACL’s family of anti-static coatings for plastics provides dependable protection by allowing static
to dissipate at a safe rate without wearing off or losing resistivity. These coatings are made of a
proprietary blend of electro-active polymers which allows the coating to be inherently dissipative,
regardless of ambient relative humidity.
Intended for interior use, the Staticide
based one-part system. Whichever application method is chosen, this coating system will have
superior optical qualities, leaving a highly transparent film once applied.
Staticide
ponents once dry. It is particle-free and safe to use in environments where contamination is a
concern. Items coated with the Staticide
the 6001 Mat & Table Top Cleaner.
Like our Staticide
effective solution without sacrificing efficiency and quality. Suitable to use where static interferes
with production assembly and ideal to use in static control environments to prevent ESD events.
Use on electronic packaging, conveyor parts, and on objects in electronic assembly work areas.
6300 - STATICIDE
The 6300 formula is designed for application on common plastics such as acrylic, PET, PETG,
PVC, and polycarbonate. Curing this coating can be done at ambient temperatures or acceler-
ated through low heat. This product is ideal for plastic parts, electronic housing, bins, clamshell
packaging and shelving to prevent static build-up and maintain ESD safety standards.
Product #6300Q:
Product #63001:
6400 - STATICIDE
The 6400 formula is chemically enhanced to improve adhesion to plastics like polypropylene and
polyesters that normally resist coatings. The 6400 coating requires a heat cure at low tempera-
ture.
Product #6400Q:
Product #64001:
STATICIDE
»
»
»
»
»
»
»
»
»
»
Translucent without appearing “milky”
Adheres to a variety of plastics without chipping or peeling
No silicone or chlorides, RoHS compliant
Meets ANSI/ESD S20.20 for static dissipation
Can be applied via flow coat, dipping, foam brush, or spray
Apply to tubing, clamshell packaging, carrying trays, viewing ports, or wherever static is a
concern
Special formulations available for lower resistance and complex plastics
Coverage: foam brush - 1500 sq. ft. per gallon @ .5 mil dry
Coverage: flow coat - 600 sq. ft. per gallon @ 1.5 mil dry
Surface resistivity: 10
®
ESD Safety Shield’s low V.O.C. formulation will not outgas harmful or volatile com-
®
1-quart bottle
1-gallon bottle
1-quart bottle
1-gallon bottle
Topicals, in the right situation, Staticide
®
®
ESD SAFETY SHIELD for General Use
ESD SAFETY SHIELD for Polypropylene
6
- 10
®
7
ohms/square average
ESD SAFETY SHIELD
®
ESD Safety Shield is simple to use since it is a water-
®
ESD Safety Shield can be cleaned and maintained with
®
ESD Safety Shield provides a cost-