FN5030-25-33 Schaffner EMC Inc, FN5030-25-33 Datasheet

no-image

FN5030-25-33

Manufacturer Part Number
FN5030-25-33
Description
Output Filters For Frequency Inverters
Manufacturer
Schaffner EMC Inc
Series
FN 5030r
Datasheet
1.FN5030-25-33.pdf (3 pages)

Specifications of FN5030-25-33

Filter Type
Power Line
Voltage - Rated
288V, 500V
Current
25A
Mounting Type
Chassis Mount
Termination Style
Terminal Block
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Inductance
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
296-807
Technical specifications
Maximum continuous operating voltage:
dc link voltage:
Motor frequency:
Switching frequency:
Rated currents:
Motor cable length:
High potential test voltage:
Protection category:
Overload capability:
Temperature range (operation and storage):
Flammability corresponding to:
Design corresponding to:
MTBF @ 50°C/400V (Mil-HB-217F):
Features and benefits
■
■
■
■
Important note
FN 5030 are additional common-mode modules. They can NOT work alone! FN 5030 have to be operated downstream of a regular (symmetri-
cal) sine wave output fi lter. Possible combinations are FN 5020/FN 5030 for motor frequencies up to 600Hz, or FN 5010/FN 5030 for max. 70Hz.
For additional information please consult the Schaffner application note „Sinus Plus − New Output Filter Concept for Power Drive Systems“.
Add-on sine wave output fi lter module
for common-mode voltage improvement
Add-on output filter module for the use
with FN 5010 or FN 5020 sine wave output
filters from Schaffner.
Elimination of premature motor failure
caused by bearing damage.
Eliminates interference propagation
towards components or conductors in the
vicinity.
Restricts pulse currents to ground and
hence limits leakage currents in the PE.
■
■
■
■
■
■
■
3x 500/288VAC
1000VDC max.
0 to 600Hz
6 to 15kHz
25 to 120A @ 50°C
1000m max. (in combination with FN 5020 only)
P –> E 2000VAC for 2 sec
P –> P 1100VDC for 2 sec
IP20
1.5x rated current for 1 minute, once per hour
-25°C to +100°C (25/100/21)
UL 94V-2 or better
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
>100,000 hours
■
■
■
■
Additional module for use with FN 5010
or FN 5020 sine wave filters only
For motor frequencies up to 600Hz
Reduction of common-mode
interferences on motor cables
Improvement of EMC environment
Elimination of motor bearing damages
Possibility to use very long unshielded
motor cables
Improvement of system reliability
Allows the use of extremely long unshiel-
ded motor cables without causing radiation
problems (EN 55014, MDS clamp).
Reduces the required EMI suppression
efforts on the line side.
Allows the use of lower rated drives with
long motor cables due to lower losses in
the IGBTs and in the motor cable.
Suitable for rotating fields up to 600Hz.
Output fi lters
FN 5030
Design protected by international patent
Typical applications
■
■
■
■
■
■
Motor drive applications with extremely
long motor cables
Motor drive applications with unshielded
motor cables
Motor drives and motors in high-speed
applications
Mission critical applications
Applications with multiple parallel motors
Retrofit of motor drives into existing
installations with old wiring and motors

FN5030-25-33 Summary of contents

Page 1

Add-on sine wave output fi lter module for common-mode voltage improvement Technical specifications Maximum continuous operating voltage: dc link voltage: Motor frequency: Switching frequency: Rated currents: Motor cable length: High potential test voltage: Protection category: Overload capability: Temperature range (operation ...

Page 2

Components > FN 5030 Filter selection table Filter Rated current @ 50ºC [A] FN 5030-25- 5030-55- 5030-75- 5030-120-35 120 * General purpose four-pole (1500r/min) AC induction motor rated 480V/50Hz. ** Exact value highly ...

Page 3

Components > FN 5030 Mechanical data 25 and 55A types Dimensions 25A A 310 B 200 C 162 D 246 E 280 F1 120 ...