CP304/1518 CHARLESWATER, CP304/1518 Datasheet - Page 5

• Manufacturer Part Number: CP304/1518
• Description: BAG, METALLISED, 15"X18"
• Manufacturer: CHARLESWATER

Specifications of CP304/1518

• Width: 15"
• Height: 18"
• Bag Material: Polyester, Metal, Polyethylene
• Bag Type: Recloseable
• Shielding Material: Aluminium
• Colour: Metallised
• External Length / Height: 450mm
• External Width: 380mm
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: na

Metal Out Bag Sizes W x L (mm)
bags for particular applications and after one
year from purchase date.
or scratched should be discarded. The Bag's
protection is lost if there is an electrical path from
the charge on the outside of the Bag to the inside
layer and ESDS parts within. Scratching may
compromise the Faraday Cage shielding
protection of shielding bags so they will not
perform their function of protecting stored or
transported ESD susceptible devices from
electrostatic charges and discharges.
Packaging Guidance: "The objective of ESD
protective packaging is to prevent a direct
electrostatic discharge to the ESDS item
Item #
90300
90302
90304
90306
90308
All ESD Shielding Bags that are ripped, torn,
The user must determine the suitability of ESD
From ANSI/ESD S20.20 paragraph 6.2.4.2.
Charleswater Europe ESD Bags Are Generally Reusable
Size
75 x 125
100 x 150
100 x 760
125 x 200
150 x 255
Item #
90310
90312
90314
90316
90318
Size
150 x 760
200 x 255
200 x 305
255 x 305
255 x 355
contained within and allow for dissipation of
charge from the exterior surface. In addition, the
packaging should minimize charging of the ESDS
item in response to an external electrostatic field
and triboelectrification. They may also lose static
shielding properties by crumpling, puncturing and
folding."
Transparent Metal In ESD Shielding Bag up to
six times and then discard.
percentage of the re-used ESD Bags using test
procedures outlined in ANSI EOS/ESD-DS11.11 -
1993 Surface Resistivity Standard, ESD-DS11.12
- 1996 Volume Resistance Measurements of
Static Dissipative Planar Materials, and Shielding
Materials EOS/ESD DS11.31 -1994.
Item #
90320
90322
90324
90326
90328
Some end users reuse a Statshield®
Ideally, the user should test, auditing some
Size
255 x 610
280 x 380
305 x 405
305 x 455
380 x 455
Item #
90330
90332
Size
455 x 455
455 x 610
Use Charleswater Europe ESD Bags to
meet IEC 61340 5-1 paragraph 6
Protective Packaging states, "The primary
functions of protective packaging outside
the ESD Protected Area are to:
• limit tribo-electric charging;
• provide shielding against electrostatic
• The packaging shall be capable of
Statshield
package in an oversized shielding bag rather
than a cardboard box. Therefore, our bags are
not exposed to water vapors that will degrade
the metallized shielding layer. Our bags have an
additional layer of barrier protection because of
our packaging.
Ideally, ESD bags should be stored in a dry, well
ventilated room with a reasonably consistent
temperature of 68°F (20°C) and be protected
from exposure to direct sunlight. Ideally, ESD
bags should not be stored in ultraviolet sunlight,
moisture, or heat.
The user shall determine the suitability of the
product for their intended use. Charleswater
Europe’s only obligation shall be to replace such
quantity of the product proved to be defective.
See full Limited Warranty information at
www.charleswater.co.uk/warranty.htm.
fields and discharges.
providing charge drainage to EPA
ground when brought into an EPA.”
®
bags are packaged 100 per