Static Shielding Ziplock Bag_ANT013SSB
Disclaimer: This data sheet and its contents (the “Information”) belong to the Premier Farnell Group (the “Group”) or are licensed to it. No license is granted for the use of it other then for information purposes
in connection with the products to which it relates. No license of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet
should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting
from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to
limit or restrict the Group’s liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2008.
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Features:
•
•
•
•
•
•
•
Additional Notes:
We recommend that all of our static shielding bags be used
within 2 years from the date of manufacture. Store this product
in its original packaging in a climate-controlled environment
where temperature ranges from 21°C -23°C and relative
humidity is 45 - 50%.
energy inside and prevents static build-up
ANSI/ESD S-20.20
to static, eg PCB’s, IC integrated circuit , CD driver, HD etc
Metal “Faraday cage” layer shields products from electric
Four layer protection guards against charges inside and out
Semi transparent for easy content identification
Surface resistance of 10
Conforms to MIL-PRF-81705D Type III, EIA 625, EIA 541,
Custom sizes and print available on request
Suitable for packing electronic products which are sensitive
Inner Surface Dissipative Layer
Outer Surface Dissiative Layer
Bag Opening
Aluminized Polyester
Ziplock Top
3rd Seal
Width
Polyethylene
8
-10
11
Ω
Construction:
Our static shielding bags are constructed in four layers, consisting of a static
dissipative polyester outer layer and a static dissipative polyethylene inner layer
with a centre metallised shield layer.
Our bags are manufactured from industry approved polyester and polyethelene
laminates. The polyester dielectric works with the metal layer to provide a Faraday
effect, the metal layer preventing penetration from damaging electrostatic fields.
The specially processed polyethelene keeps tribocharging to a minimum.
Configuration(s):
Bags are offered in a 2-seal configuration and bottom fold, with our standard
flexographically printed artwork. Please note any bags that are longer than 24”
will have a 3rd seal along the bottom edge.
SPC
SPC
013-0002_Static Shielding Bag 1687792 MC | November 10, 2010 9:51 AM
SPC
SPC