T1 DOMUS, T1 Datasheet - Page 25

• Manufacturer Part Number: T1
• Description: FAN, WALL TIMER, 100MM
• Manufacturer: DOMUS

Specifications of T1

• External Height: 141mm
• External Width: 141mm
• External Depth: 91mm
• Current Type: AC
• Supply Voltage: 230VAC
• Flow Rate: 26l/s
• Noise Figure Typ: 38.8dB
• Bearing Type: Ball
• Approval Bodies: BS EN 60335
• Depth: 91mm
• Flow Rate - Imperial: 55cu.ft/min
• Flow Rate - Metric: 94m3/h
• Noise Rating: 38.8dBA

The DOMUS Multi Room Extract (MRE)
system is a stylish and compact unit that
provides a highly efficient and low cost form
of continuous and controlled domestic
ventilation from a single extraction unit. Its
adaptability enables the system to be suitable
for common house layouts and can be used in
up to five rooms.
The MRE system prevents the need
for multiple fans in different rooms and
reduces, to one, the number of external
outlets required.
A two speed* ball bearing motor is fitted to
ensure long life and efficiency. The second
speed acts as a powerful extraction boost
which should be used when the removal of
moisture and unwanted air is most needed
e.g. after a bath or during cooking.
MULTI ROOM EXTRACT SYSTEM
Low running cost
Complies with the Building Regulations
(BRE Digest 398)
Adaptable for different installations
Can be wired for 2 speed operation
Includes installation kit
Easy to install
Exceptionally quiet in operation
2 year guarantee
The 80mm inlets are for use in the bathroom
or WC and the 125mm inlet should be used in
the kitchen.
Fan spigots are fitted with flow regulators to
balance the system. A simple to operate
cursor device regulates the airflow in
the kitchen.
The MRE system is normally installed in the
loft or ceiling void and can be either
fixed to a solid object (such as a joist
or pillar) with a bracket, or it
can be suspended with the
cord provided in the kit.
Suspending
the
system
has the benefit of reducing unnecessary noise
vibration.
Remember that extraction systems remove
air from the building and in order to balance
the airflow, provision must be made for
replacement air.
*A single pole changeover switch is required.
75