299-93-314-11-001000 Mill-Max Manufacturing Corp., 299-93-314-11-001000 Datasheet - Page 2

• Manufacturer Part Number: 299-93-314-11-001000
• Description: SOCKET RT ANGLE 14PIN DIP .300
• Manufacturer: Mill-Max Manufacturing Corp.
• Type: DIP, 0.3" (7.62mm) Row Spacingr
• Series: 299r

Specifications of 299-93-314-11-001000

• Number Of Positions Or Pins (grid): 14 (2 x 7)
• Pitch: 0.100" (2.54mm)
• Mounting Type: Through Hole, Right Angle, Horizontal
• Features: Closed Frame
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Number Of Contacts: 14POS
• Number Of Contact Rows: 2
• Row Spacing (mm): 7.62mm
• Pitch (mm): 2.54mm
• Grid Size: Not Required
• Contact Plating: Gold Over Nickel
• Insulation Material: Polychlorinated Terp
• Mounting Style: Through Hole
• Contact Material: BeCu Alloy
• Operating Temp Range: -55C to 125C
• Product Height (mm): 10.1mm
• Product Depth (mm): 8.13mm
• Product Length (mm): 17.7mm
• Gender: SKT
• Body Orientation: Right Angle
• Current Rating: 3A
• Insulation Resistance: 10Gohm
• Contact Resistance Max: 10mOhm
• Voltage Rating: 150VDC/100VAC
• Product: DIP / SIP Sockets
• Termination Style: Solder Pin
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant
• Other names: 299-93-314-11-001; 2999331411001000; ED58435

Mill-Max Mfg. Corp. Datasheet — Last Modified 4/6/2011
INSULATOR INFORMATION:
PCT
Properties of PCT Polyester:
BRASS ALLOY
Properties of BRASS ALLOY:
High Temperature
This is to Certify that the product described above is manufactured to Mill-Max quality standards in accordance with all
applicable specifications and drawing. Mill-Max certifies this product to be free from defects of materials and workmanship.
This Certificate of Compliance covers the following requirements:
Dimensional (all features verified to be within tolerances described on the applicable drawing).
Raw Material (materials and properties verified to be as described on the applicable drawing).
Plating (platings as required, thickness verified, and performance including solderability per mil-standard).
Performance (insertion extraction or other force requirements as described on the applicable drawing).
Reference:
1. Regulation EC No 1907/2006 of the European Parliament and of the Council of 18 December 2006, concerning the
Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
2. ECHA, Candidate list of Substances of Very High Concern (SVHC)
Mill-Max is aware of the regulation and the SVHC list the EU published (referenced above). Mill-Max does not produce or
sell any of the listed substances in their homogeneous form. These substances are not intentionally added during the
manufacturing of any Mill-Max products. To our knowledge, our products do not contain the substances described on the
BRASS ALLOY
Properties of BRASS ALLOY:
Brand: Thermx
Grade: CG-933
Rated voltage: 100 VRMS/150 VDC
Insulation resistance: 10,000 Megaohms min.
Material Heat Deflection Temp (per ASTM D 648): 529°F (276°C) @ 66 psi
Dielectric strength: 1000 VRMS min. (700 VRMS min. for series 117 Shrink DIP)
Note: Materials above 446°F (230°C) are considered suitable for "eutectic" reflow soldering, above 500°F (260°C) for
"lead-free" reflow soldering.
Compliance Statement for Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
Chemical composition: Cu 61.5%, Zn 35.4%, Pb 3.1%†
Hardness as machined: 80-90 Rockwell B
Density: .307 lbs/in3
Electrical conductivity: 26% IACS*
Melting point: 900°C/885°C (liquidus/solidus)
†(3 to 4% lead is used to permit "free machining" and is permitted by EC Directive 2002/95Annex 6; so all pin
materials are RoHS compliant)
*International Annealed Copper Standard, i.e. as a % of pure copper.
Polyester, (Thermx CG933, black)
Chemical composition: Cu 61.5%, Zn 35.4%, Pb 3.1%†
Hardness as machined: 80-90 Rockwell B
Density: .307 lbs/in3
Electrical conductivity: 26% IACS*
Melting point: 900°C/885°C (liquidus/solidus)
†(3 to 4% lead is used to permit "free machining" and is permitted by EC Directive 2002/95Annex 6; so all pin
materials are RoHS compliant)
*International Annealed Copper Standard, i.e. as a % of pure copper.
(UNS C36000) per ASTM B 16
(UNS C36000) per ASTM B 16
Certificate of Compliance:
http://echa.europa.eu/reach_en.asp
Page 2 of 3