VM53S3-12.800-2.5/-30+75 MERCURY UNITED ELECTRONICS, VM53S3-12.800-2.5/-30+75 Datasheet - Page 2

• Manufacturer Part Number: VM53S3-12.800-2.5/-30+75
• Description: OSCILLATOR, 12.8MHZ, SMD
• Manufacturer: MERCURY UNITED ELECTRONICS
• Series: Sr

Specifications of VM53S3-12.800-2.5/-30+75

• Harmonic Suppression (2nd Harmonic): -7dBc
• Operating Temperature Range: -30°C To +75°C
• Resonator Case: SMD
• No. Of Pins: 4
• Phase Noise Typ: -150dBc/Hz
• Supply Voltage: 3V
• Oscillator Mounting: SMD
• Rohs Compliant: Yes
• Tuning Voltage: 1.5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

General Specifications (at+25°C and specified input voltage)
Frequency Range
Output Wave From
Initial Calibration Tolerance
Standard Frequencies (partial list)
Frequency Stability
Typical Operating Temperature
Range (examples)
Output Voltage Level (peak to peak)
Current Consumption.
(Over operating temperature range.)
Mechanical Frequency Tuning
Input Voltage Range
Start-Up Time.
Output Load
Harmonics Distortion
Output Format
Storage Temperature
Note 1: Some specifications are package dependent. Please refer to the spec. sheet of individual packages once a package is
selected..
“ T C X O” and “V C T C X O "
Wave Form: Clipped Sine Wave
Analog Sensor Output. TCXOs only.
Digital Sensor Output. TCXOs only.
MERCURY
vs Temperature
vs Aging
vs Voltage Change
vs Load Change
vs reflow (SMD models only)
Control voltage
Frequency
Deviation
Range
Slope Polarity
Linearity
Modulation Band Width
Input Impedance
Standard
Option
Option
Standard
Standard
Option
Standard
Option
Page 2 of 8
9.6 MHz ~ 26.0 MHz
Clipped Sine wave. Wave form code is “S”
With mechanical trimmer: < ±0.5 ppm. +25°C ±2°C.
Without mechanical trimmer: ±2 ppm at +25°C ±2°C.
±1 ppm , ±1.5 ppm, ±2.0 ppm, ±2.5 ppm, ±3 ppm, or ±5 ppm, over
operating temperature range. Referenced to frequency reading at +25°C.
±1.0 ppm max. first year at +25°C
±0.2 ppm max. for a ±5% input voltage change
±0.2 ppm max. for a ±10% loading condition change
±1 ppm max. 1 reflow and measured 24 hours afterwards
Hi Rel: -55°C to +85°C or -55°C to +125°C. Selected models only. Customer
package and /or pin configurations are welcome.
0.8 V p-p min.
9.6~13 MHz: 1.3 mA max.
13.1~20 MHz: 1.5 mA max.
20.1~26 MHz: 2.0 mA max.
±3 ppm min. tuning. (not for aqueous washing cycles)
Note: VM57 and VM53 have no mechanical trimmer built-in.
No mechanical trimmer built-in (Able to withstand aqueous washing cycles). Part
number: Please add “1” after the regular model prefix. For example: M381S3.
+15.0V, +12.0V, +10.0V, +9.0; +3.3V D.C.
+ 2.75 V D.C. min.; +5.0 V D.C. max.
±10 ppm min. for +1.5 V±1.0 V
Narrow: ±1 ppm max. or custom
Wide: ±35 min. or custom
Positive slope. Positive voltage for positive frequency shift.
Negative slope. Selected packages only.
10 % max.
10 KHz min. Measured at -3 dB.
1 meg Ω min.
Linear analog voltage-temperature output on pin 1. Part number: Please add “2”
after the regular model prefix. For example: M472S3.
Digital voltage-temperature output on pin 1. Part number: Please add “3” after the
regular model prefix. For example: M473S3
2 m. sec. Typical, 3 m. sec. max. (reach 90% amplitude and at+25°C±2°C)
10 K Ω // 10 pF ±10%
- 7dBc max.
DC block, AC coupled. VM53 and M53 are DC coupled.
-40°C to +85°C or -55°C to +125°C (package dependent)
9.6, 10.0, 12.8, 13.0, 14.4, 15.36, 16.384, 19.2, 19.440, 19.68 MHz
-20 °C to +70°C
+1.5 V±1.0 V
-30°C to +85°C
0°C to +60°C
+3.0 V (voltage code is “3”)
“S” Series
Date: Jan. 3, 2008
-30°C to +60°C
-40°C to +85°C. or custom.
0°C to +70°C
+2.5 V±2.0 V.
+1.5 V±1.0 V for VM57S5
-30°C to +75°C
-10°C to +60°C
+5.0 V (voltage code is “5”)
Rev. 2
MERCURY
Since 1973