WA301 AIM-TTI INSTRUMENTS, WA301 Datasheet
WA301
Manufacturer Part Number
WA301
Description
FUNCTION GENERATOR SIGNAL AMP, FREQ 1MHZ
Manufacturer
AIM-TTI INSTRUMENTS
Datasheet
1.WA301.pdf
(1 pages)
Specifications of WA301
Signal Generator Type
Function
Bandwidth
1MHz
Supply Voltage Range
197.8V To 262.2V
External Height
75mm
External Width
210mm
External Depth
230mm
Output Voltage
30V
Rise Time
0.5µs
Lead Free Status / RoHS Status
na
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
WA301
Manufacturer:
POWERSOURCES
Quantity:
86
SPECIFICATIONS
Bandwidth:
Flatness:
Rise/fall time:
Distortion:
Gain:
Input impedance:
OUTPUT
Output impedance:
Output 0dB:
Output -20dB:
DC offset:
GENERAL
Power:
Size:
Weight:
Operating Range:
Storage Range:
Safety:
EMC:
WA301 - 30V pk-pk Waveform Amplifier
WA301 waveform amplifier - specification and description
WA301 - Description and Specifications
GENERAL DESCRIPTION
The WA301 is a DC to 1MHz amplifier with a maximum
output (e.m.f.) of 30 volts peak to peak from a 50 source
impedance. A 600 output is also provided.
The unit can provide up to 15 volts peak to peak into a 50
load and can drive up to 300mA peak into a low impedance
or short circuit.
Fully variable gain between x1 and x10 is provided by a
rotary vernier with calibrated end stops. A -20dB output
attenuator is also incorporated.
An "output clip" LED is provided to warn if the output
amplitude exceeds ±15V.
Extends the output range of function generators
30 Volts peak to peak output swing
DC to 1MHz bandwidth
High impedance input, 0dB to +20dB gain
50 Ohm and 600 Ohm outputs
20dB swtitchable output attenuator
Fully protected output
-3dB at 1MHz
-1dB at 400kHz
<0.5µs
<0.1% at 1kHz
Vernier adjustment between x1 and x10
10k
50 and 600 (separate sockets)
30V pk-pk max. from 50 (15V into 50 Ohms), 30V pk-pk max. from 600 (15V into 600 Ohms)
3V pk-pk max. from 50 (1.5V into 50 Ohms), 3V pk-pk max. from 600 (1.5V into 600 Ohms)
<5mV
230V or 115V AC nominal 50/60Hz, adjustable internally; operating range ±14% of nominal; 20VA max.;
Installation category II
210(W) x 75(H) x 230(D)mm, inc. feet.
1.1kg
+ 5°C to 40°C, 20-80% RH.
- 40°C to 70°C
Complies with EN61010-1.
Complies with EN63126.
APPLICATIONS
Most function generators have a maximum open-
circuit output voltage of 20V peak to peak. The WA301
enables this to be boosted to 30V peak to peak.
Commonly the WA301 will be used as a slave to a function
generator with the gain set to x10. Thus an output of 3V pk-
pk at the function generator would give rise to an output of
30V pk-pk from the WA301.
Alternatively the variable gain facility might be used to
provide an adjustable output level from a fixed level source.