EVID 6.2TW TELEX COMMUNICATIONS, EVID 6.2TW Datasheet - Page 2

no-image

EVID 6.2TW

Manufacturer Part Number
EVID 6.2TW
Description
Line Matching Transformer
Manufacturer
TELEX COMMUNICATIONS
Datasheet
Architecture & Engineering Specs:
The loudspeaker shall be a two-way system consisting of two 6” (152mm)
low-frequency transducers, a 1” (25mm) high-frequency transducer with
a Coherent Coverage Waveguide, and a frequency-dividing network
installed in a vented, line-array enclosure. The network shall include a
passive limiter for both the low-frequency and high-frequency transducers.
The loudspeaker system shall meet the following performance criteria:
Power handling, 300-Watts of EIA RS-426A continuous pink noise (6 dB
crest factor); Frequency response, 62 Hz - 20 kHz (-10 dB from rated
sensitivity); Pressure sensitivity, 94 dB at one watt, 200 Hz -10 kHz at one
meter; Impedance, 8 ohms nominal, 6 ohms minimum. The high-frequency
transducer shall drive a waveguide to cover evenly 100° horizontally by
90° vertically. The enclosure shall be molded of acrylic butyl styrene. The
enclosure shall be 16.5” (419mm) high, 9” (228mm) wide, 11.75”
(298mm) deep. The finish shall be a paintable black or white. The grille
shall be zinc plated, powder coated for corrosion resistance, and
restrained with a safety leash. The loudspeaker shall be adjustable over
a range of 100° horizontally and 90° vertically. The support bracket shall
be low profile and integral with the enclosure. The system shall be weather
resistant to MIL Spec 810 and IEC 529 IP 34 test conditions. The surface
mount loudspeaker shall be the Electro-Voice® EVID model 6.2.
Block Diagram:
Dimension Drawings:
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 1/2007
Part Number 38109-983 Rev F
Front
Top
Wall Plate
Side
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
Frequency Response:
Beamwidth:
Directivity:
Performance Match:
Available Accessories:
EVID 6.2 Part Numbers:
For warranty repair or service information, contact the Service Repair department at:
Other International locations. For customer orders, contact Customer Service at:
• EVID 12.1 Sub
• VS-6
• AB-ZE
• TC-6B
• TC-6W
301047-001
301047-002
301047-003
301047-004
U.S.A. and Canada only. For customer orders, contact Customer Service at:
For technical assistance, contact Technical Support at: 866/78AUDIO
Vertical Mount Desk Stand for 6.2
Array Bracket Kit for 2 or 4 ZX1i or EVID Systems, Black
Black Weatherized Terminal Cover for 6.2
White Weatherized Terminal Cover for 6.2
Black
White
White, Transformer
Black, Transformer
Specifications subject to change without notice.
+ 49 9421-706 0 Fax: + 49 9421-706 265
+ 1 952 884-4051 Fax: + 1 952 887-9212
800/392-3497 Fax: 800/955-6831
800/685-2606

Related parts for EVID 6.2TW