43020-2000 Molex Inc, 43020-2000 Datasheet - Page 3

• Manufacturer Part Number: 43020-2000
• Description: CONN PLUG 20POS 3MM DUAL ROW
• Manufacturer: Molex Inc
• Series: Micro-Fit 3.0™ 43020r

Specifications of 43020-2000

• Pitch: 0.118" (3.00mm)
• Number Of Rows: 2
• Connector Type: Plug
• Contact Type: Male Pin
• Number Of Positions: 20
• Row Spacing: 0.118" (3.00mm)
• Mounting Type: Panel Mount, Snap-In
• Contact Termination: Crimp
• Fastening Type: Ramp
• Color: Black
• Note: Contacts Not Provided
• Product Type: Plugs - Housings
• Contact Gender: Pin (Male)
• Number Of Positions / Contacts: 20
• Mounting Style: Free Hanging
• Mounting Angle: Vertical
• Termination Style: Crimp
• Housing Material: Polyester
• Voltage Rating: 350 V
• Current Rating: 5 A
• Gender: Plug
• No. Of Contacts: 20
• No. Of Rows: 2
• Pitch Spacing: 3mm
• Connector Mounting: Panel
• Contact Material: Phosphor Bronze
• Contact Plating: Tin
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 043020-2000; 043020-2000-P; 0430202000; 0430202000-P; 43020-2000-P; 430202000; 430202000-P; WM2486

REVISION:
DOCUMENT NUMBER:
D
5.2 MECHANICAL REQUIREMENTS
Ramp Yield Strength
Retention Force
Connector Mate
Thumb Latch to
Unmate Forces
Insertion Force
DESCRIPTION
(into Housing)
Pin to Header
Pullout Force
(Mechanical)
(in Housing)
PS-43045
(Random)
Durability
Retention
ECR/ECN INFORMATION:
EC No:
Vibration
Terminal
Terminal
DATE:
Normal
Shock
(Axial)
Force
Wire
and
UCR2002-0249
2001 / 9 / 11
PRODUCT SPECIFICATION
Mate and unmate connector (male to female)
at a rate of 25 ± 6 mm (1 ± ¼ inch) per
minute. (Example of 2 ckt parts)
Axial pullout force on the terminal in the
housing at a rate of 25 ± 6 mm (1 ± ¼ inch)
per minute.
Mate connectors up to 30 cycles at a
maximum rate of 10 cycles per minute prior
to Environmental Tests.
Mate connectors and vibrate per EIA 364-28,
test condition VII.
Apply a perpendicular force.
Apply axial push force to pin at a rate of 25 ±
6 mm (1 ± ¼ inch) per minute.
Full mate and then Unmate the connectors at
a rate of 25 ± 6 mm (1 ± ¼ inch) per minute.
TEST CONDITION
Apply an axial insertion force on the terminal
at a rate of 25 ± 6 mm (1 ± ¼ inch).
Mate connectors and shock at 50 g’s with ½
sine wave (11 milliseconds) shocks in the
±X,±Y,±Z axes (18 shocks total).
Apply an axial pullout force on the wire at a
rate of 25 ± 6 mm (1 ± ¼ inch).
TITLE:
CREATED / REVISED BY:
SAMIEC
PRODUCT SPECIFICATION
DUAL ROW CONNECTORS
MICRO-FIT
CHECKED BY:
MUELLER
Discontinuity < 1 microsecond
Discontinuity < 1 microsecond
MINIMUM pullout force
20 awg: 57.8 N (13.0 lbf)
22 awg: 35.6 N (8.0 lbf)
24 awg: 22.2 N (5.0 lbf)
26 awg: 13.3 N (3.0 lbf)
28 awg: 8.9 N (2.0 lbf)
30 awg: 6.6 N (1.5 lbf)
MINIMUM withdrawal force
MAXIMUM insertion force
MAXIMUM insertion force
MINIMUM retention force
MINIMUM Yield Strength
MINIMUM pushout force
20 milliohms MAXIMUM
20 milliohms MAXIMUM
20 milliohms MAXIMUM
3677.5 N (375 grams)
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
(change from initial])
(change from initial)
(change from initial)
68.4 N (15.4 lbf)
REQUIREMENT
11.6 N (2.6 lbf)
24.5 N (5.5 lbf)
14.7 N (3.3 lbf)
13.7 N (3.1 lbf)
3.7 N (0.8 lbf)
MINIMUM
&
&
&
APPROVED BY:
MARGULIS
SHEET No.
3
of
5