MGA-632P8-TR2G Avago Technologies US Inc., MGA-632P8-TR2G Datasheet - Page 10

• Manufacturer Part Number: MGA-632P8-TR2G
• Description: IC,Microwave/Millimeter Wave Amplifier,SINGLE,GAAS,LLCC,8PIN,PLASTIC
• Manufacturer: Avago Technologies US Inc.

Specifications of MGA-632P8-TR2G

• Current - Supply: 75mA
• Frequency: 1.4GHz ~ 3GHz
• Gain: 17.6dB
• Noise Figure: 0.62dB
• P1db: 19.2dBm
• Package / Case: 8-WFDFN Exposed Pad
• Rf Type: Cellular, GSM, CDMA, W-CDMA
• Test Frequency: 1.95GHz
• Voltage - Supply: 4V
• Manufacturer's Type: Low Noise Amplifier
• Number Of Channels: 1
• Supply Current: 70@4VmA
• Frequency (max): 3.8GHz
• Operating Supply Voltage (max): 5.5V
• Power Dissipation: 550mW
• Package Type: TSLP
• Mounting: Surface Mount
• Pin Count: 8
• Noise Figure (typ): 0.62@1950MHzdB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Load pull test set up
Figure 34. Test setup for load pull data
The input port is matched for good NF and IRL. Because
of the high reverse isolation, any change on the output
port has a minimum change on the input port. Therefore,
only the output port is tuned for the maximum OIP3. R1
is varied for different level of gain Test condition for the
OIP3: -20dBm at 1.95GHz ±5MHz.
10
C1
C4
C5
C6
Rbias
C7
Vbias
RFgnd
Vbias
Input
Bias
Output
Gnd
FB1
Thickness: 0.254mm
Dielectric: RO4350
1.44mm
0.40mm
C3
R1
1.41mm
3.30mm
Bias Tee
Vd
Load pull