AT04-4P Amphenol Sine Systems Corp, AT04-4P Datasheet - Page 4

• Manufacturer Part Number: AT04-4P
• Description: CONN RCPT 4POS 14-20AWG SIZE 16
• Manufacturer: Amphenol Sine Systems Corp
• Series: AT Series™r

Specifications of AT04-4P

• Connector Type: Receptacle
• Color: Gray
• Contact Type: Male Pin
• Number Of Positions: 4
• Number Of Rows: 2
• Mounting Type: Free Hanging (In-Line)
• Contact Termination: Crimp
• Fastening Type: Latch Holder
• Note: Contacts Not Provided
• No. Of Positions: 4
• Connector Mounting: Cable
• No. Of Contacts: 4
• Gender: Receptacle
• For Use With: AT Series Connectors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Pitch: -
• Row Spacing: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 889-1002

1
AT Series
•
•
•
•
AT Series
Performance Criteria
CURRENT CAPACITY
WIRE RANGE
TEMPERATURE
DIELECTRIC VALUE
FLAME RESISTANCE
DROP TEST
VIBRATION
CONNECTOR TERMINAL RETENTION
CONNECTOR RETENTION
THERMAL SHOCK
INSULATION RESISTANCE
MATING CYCLE DURABILITY
CONTACT MILLIVOLT DROP
ULTRAVIOLET EFFECTS
WATER IMMERSION
Product Material
HOUSINGS
SEALS
SECONDARY LOCKS
CONTACTS
SHOCK
The connector design incorporates an integral latching system that ensures a defi nitive electrical and mechanical
connection
Connector housings are manufactured with a thermoplastic material that is not only durable, but has excellent UV
resistance, dielectric/mechanical properties and environmentally RoHS compliant
The sealing system is comprised of a front and rear silicone, multi-sealing, perimeter against environmental ingress
Contacts are derived from quality copper alloy to ensure an electrically-reliable connection. For applications
demanding higher levels of performance, you can rely on our RockSolid™ contact technology
™
Connectors
™
Specifi cations
NOTE: All testing meets SAE J2030 specifi cations
No. 16, 13 amps (max)
No 16 contacts will accept wire ranges of 14 thru 20 awg
Operating temperature range: -55°C to +125°C at rated current
Meets or exceeds 1500 volts minimum
All dielectric materials have a fl ammability rating of UL94 V-0 or better
Shall not become detached or loosened when placed at 750mm and dropped to concrete eight times
No latch disengagement or discontinuity shall be the result when subjected to 50 g’s in each of three axis (X, Y & Z)
Continued continuity without degradation to mechanical or physical attributes following vibration. (max acceleration
20 g’s at Sine sweep of 10-2000Hz)
When subjected to a direct pull, size 14-20 achieves minimum pull-out force of 110 newtons
A mated connector subjected to a pulling force by the exiting wire bundle at 111 newtons times the number of contacts
to a maximum of 444 newtons applying load for 30 seconds
Subjected to 10 cycles at 55°C to +125°C with no cracking, chipping or other damage detrimental to the normal opera-
tion of the connector
Insulation resistance at 25°C shall be greater than 20 megohms when 1000 VDC are applied
Following 100 cycles of connection engagement and disengagement, degradation either mechanical or electrical is
not evident
No. 16 contacts with 16 awg conductor - *100 millivolt drop max at 13 amps test current
Test the mated connectors for 1000 hours per ASTM G 154 or ASTM G 153 with 20 hours UV and 4 hours of condensation
for each cycle
A mated connection, properly wired, placed in an oven at +125°C for 1 hour, then placed immediately in a depth of
water of 1 meter for 4 hours without loss of electronic performance
Thermoplastic
Silicone Elastomer
Thermoplastic
Copper Alloy, Nickel Plated, Gold optional