MTGEZW-01-0000-0B00E027F Cree Inc, MTGEZW-01-0000-0B00E027F Datasheet - Page 9

• Manufacturer Part Number: MTGEZW-01-0000-0B00E027F
• Description: LED, EASYWHITE, 480LM
• Manufacturer: Cree Inc
• Series: XLamp MT-Gr

Specifications of MTGEZW-01-0000-0B00E027F

• Led Color: White
• Luminous Flux @ Test: 480lm
• Cct: 2700K
• Forward Current @ Test: 1.1A
• Forward Current If Max: 4A
• Forward Voltage @ Test: 5.6V
• Viewing Angle: 120°
• Led Mounting: SMD
• Lumens @ Current - Max: 1265lm
• Lumens/watt @ Current - Test: 75lm/W
• Color: White, Warm
• Current - Test: 1.1A
• Luminous Flux @ Current - Test: 460lm
• Current - Max: 4A
• Voltage - Forward (vf) Typ: 5.6V
• Wavelength: 2700K
• Lens Style/size: Round, 8.2mm
• Mounting Type: Surface Mount
• Package / Case: 2-SMD, No Leads
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: MTGEZW-01-0000-0B00E027FTR

NOTES
Moisture Sensitivity
In testing, Cree has found XLamp MT-G EasyWhite LEDs to have unlimited floor life in conditions ≤30ºC / 85% relative
humidity (RH). Moisture testing included a 168 hour soak at 85ºC / 85% RH followed by 3 reflow cycles, with visual
and electrical inspections at each stage.
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other-
wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/
EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as
amended through April 21, 2006.
Vision Advisory Claim
WARNING. Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye
safety, please refer to the Cree LED Eye Safety application note.
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp MT-G EasyWhite LEDs to be compatible with JEDEC J-STD-020C, using the parameters
listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by
the manufacturer of solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
and EasyWhite is a trademark of Cree, Inc.
of Cree, Inc.
XLAMP MT-G EASYWHITE LEDS
9
9