SLFM360 TIMEGUARD, SLFM360 Datasheet - Page 4

• Manufacturer Part Number: SLFM360
• Description: PIR CONTROLLER, 360 DEG, FM, WHITE
• Manufacturer: TIMEGUARD

Specifications of SLFM360

• Beam Angle: 360°
• Length: 71mm
• Depth: 84mm
• Base Type: Incandescent / Halogen
• Colour: White
• External Depth: 84mm
• External Length / Height: 71mm
• External Width: 84mm
• Ip/nema Rating: IP44
• Power: RoHS Compliant
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes

3
Parts included
• PIR Sensor unit.
• Instruction manual. Please keep safe for future
• Accessory Pack. Includes wiring cover, 2 x cable
Tools and parts needed
• 3 core flexible cable.
• Electric/hand-held drill & bits.
• 75mm or 3 inch diameter hole cutter.
• Terminal or Electricians screwdriver.
• Small philips screwdriver.
• Wire cutters.
• Suitable mains interconnect cable.
This product is suitable for indoor use only. Connected
load must not exceed maximum 2000W filament/
incandescent or 500W fluorescent/low energy lighting.
Do not attempt to install if you are suffering from
nausea or dizzy spells or on medication with similar
side effects. If in any doubt, consult a qualified
electrician.
Not suitable for use with discharge lighting.
Selecting a location
The motion detector has a number of detection zones,
at various vertical and horizontal angles as shown (see
diagram A).
A moving human body needs to cross/enter one of
these zones to activate the sensor. The best all-round
coverage is achieved with the unit mounted at the
reference.
clamps, 4 x clamp screws and 1 x lens mask sticker.