ECO18PY TIMEGUARD, ECO18PY Datasheet - Page 4

• Manufacturer Part Number: ECO18PY
• Description: BULKHEAD LIGHT, PYRAMID, 18W
• Manufacturer: TIMEGUARD

Specifications of ECO18PY

• Length: 298mm
• Depth: 135mm
• Base Type: ES
• External Depth: 135mm
• External Length / Height: 298mm
• External Width: 217mm
• Ip/nema Rating: IP44
• Power Rating: 18W
• Supply Voltage: 230V
• Svhc: No SVHC (15-Dec-2010)
• Lamp Base Type: ES
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SECTION ONE
GENERAL INFORMATION
SECTION TWO
INSTALLATION
This bulkhead features an integral daylight sensing photocell which will automatically switch the
light on at dusk and off at dawn or at a time set by the user.
Unit is for indoor or outdoor use. Unit must be mounted as a fixed luminaire, and is not suitable
for portable use.
PARTS INCLUDED
- Low energy Bulkhead c/w Dusk/Dawn sensor
- Instruction manual. please keep safe for future reference.
- Accessory pack including screws and wall plugs
- 18W pL-C 4 pin low energy lamp.
- Movable Dusk/Dawn Sensor module. (see image 1 below)
- Movable sensor aperture cover (see image 2 below)
- Movable Internal sensor circuit board cover (see image 3 below).
TOOLS & PARTS NEEDED
- 3 flexible core cable (1.0mm² or 1.5mm²)
- electric/hand-held drill & bits
- Terminal or electricians screwdriver
- Wire cutters
Do not attempt to install during wet weather, if you are suffering from nausea or dizzy spells or
onmedication with similar side effects.
SELECTING THE LOCATION
The unit can be mounted horizontally or vertically on the wall or over a door see diagram A. The
unit features a movable sensor module (1) which can be placed in either horizontal or vertical
orientation.
Also a sensor aperture cover (2) is provided to be fitted in the unused aperture based on your
chosen application.
Switch off the electricity at the fuse box by removing the relevant fuse or switching
1 Dusk/Dawn Sensor Module
off the circuit breaker before proceeding with the installation.
2 Sensor aperture cover
*** IMPORTANT ***
3 Internal circuit board cover