50064FA MOFLASH SIGNALLING, 50064FA Datasheet - Page 14

• Manufacturer Part Number: 50064FA
• Description: DOME, AMBER, FOR ALL SERIES
• Manufacturer: MOFLASH SIGNALLING

Specifications of 50064FA

• Svhc: No SVHC (18-Jun-2010)
• Body Colour: Amber
• Body Material: Polycarbonate
• Colour: Amber
• Enclosure Colour: Red
• Enclosure Material: Polycarbonate
• External Diameter: 125mm
• External Height: 156mm
• External Length / Height: 156mm

Audible+Visual > Tri -Colour
LED PLC Controllable Beacon
Product overview
The Spectrum 600 Series ultilises
ultra-bright, tri-colour LEDs in one
enclosure producing amber, green
and red light in conjunction with
two synchronised piezo sounders.
The beacon is a cost-effective
alternative to traditional stacking
beacons and other process
indication applications where
multiple signal outputs, long life
and low power consumption are
Code No:
LEDA600-01
LEDA600-03
50165 Interface
50166 Mounting Pole
50004 Right-angled Wall Bracket
Kg
50/60
0.85
Hz
Voltage:
24v Dc/230v Ac --- Tri-Colour LED
24v Dc/115v Ac --- Tri-Colour LED
230v Ac
dB
ºC
-35+55
90
Light Source:
required. The Spectrum 600 comes
totally assembled and ready for
immediate installation. In addition, the
enclosure incorporates a high Ingress
Protection (IP) rating and is manu-
factured from a tough, UV stable
polycarbonate plastic that makes the
beacon suitable for harsh industrial and
marine environments. The Spectrum
600 requires external input signals for it
to function. If no PLC (or similar) is
available, then the Spectrum Interface
Unit gives the end user a control option.
APPROVAL AND
CONFORMITIES
IP
65 66 67 69K
MARINE
450 mA
450mA
Amber
Current:
Red/Green
265 mA
265 mA
FPM
INDUSTRIAL
60x90
Features
Three colours in one
housing –
360
LED long life and low
power
Combined beacon &
piezo sounders
28 signal options
PLC controllable
Optional interface unit for
non PLC operation
– 7 preset signals
Ethernet compatible
Tough, UV stable
polycarbonate housing
Material
UV Stable Polycarbonate
Plastic
O
visibility
amber
red
green
The Control Signal
The Control Signal must consist
of a 5-bit word, which has to be
assembled and transmitted in
parallel mode to the Spectrum
Beacon. The colour, flash frequency
50165 Interface Unit
for further information download Interface Data Sheet from the website
The Interface Unit contains
seven electrically isolated
prioritised channels. Each
channel accepts 24-230v Ac or
12-48v Dc input. A pre-selected
audio and/or visual signal is
supplied for each of the seven
channels. In the event of no
signal being applied, the
beacon displays continuous
green. The operating voltage for
the unit is 230v Ac. The design
allows for a 12v Dc auxiliary
Technical Specification
Type
Light Source
Signal Options
Sounder Type
Operating Temp
Enclosure Material
Ingress Protection
Beacon Control
LEDA600-01
LEDA600-03
Ultra-bright Tri-colour LEDs
Amber
Green
Red
Continuous
Slow Flash
Rapid Flash 1
Rapid Flash 2
Electronic Piezo Sounders x 2 :
db@1m
Frequency
Visual and audible signalling options can be combined –
audible signal synchronised with beacon flash
-35
UV Stable Polycarbonate Plastic
IP65 & IP67 as standard as one enclosure.
IP66 with sounder covers fitted. Sounder covers can be fitted
(snap-fixed) or permanently (adhered) into place.
Sounder covers supplied as standard.
The beacon is supplied with flying leads 2 x 1metre
4 core power cables and 6 core signal cables.
For further information download the Technical Data Sheet from our website.
O
C to +55
O
C
24v Dc or 230v Ac
24v Dc or 115v Ac
3.9 Effective Candela (390 mcd) 450mA
6.2 Effective Candela (620 mcd) 265mA
4.4 Effective Candela (440 mcd) 265mA
ON
60 fpm
90 fpm (0.11sec ON, 0.23 OFF)
90 fpm (0.23sec ON, 0.11 OFF)
90dB ±3dB (horn covers not installed)
3.1Hz ±500Hz
power supply for use in volt free
applications. Additionally, the unit
incorporates a battery [not supplied]
back-up sufficient to maintain the unit for
12 hours in case of mains power failure.
Provision is made for mains failure to be
signalled from the interface unit (device
not supplied). The unit is supplied
complete with mounting plate and cover.
This can be installed either inside an
existing enclosure or into a standard
weatherproof ‘Fibox’ IP67 mounting box
[ref. MNX PCM200/63 G].
and sound are independent of one
another but a colour signal is
necessary for the control word to be
accepted, thus any word beginning
with 00 will not be accepted.
Weight
(Optional)
0.85 kg
20mA
Visual Signals
LIGHT EMITTING DIODE
Mounting Options
The beacon has three mounting
options:
Surface Mount Plate
(3 point DIN fix) fitted as standard
Side knockouts x 2 cabling in/out
(15mm x 10mm)
Foot and Pole Mount (50166)
Right Angled Wall Bracket (50004)
BEACONS