11-71315-225-01 3M, 11-71315-225-01 Datasheet - Page 22

• Manufacturer Part Number: 11-71315-225-01
• Description: CT 150 USB CONNECTION WITHOUT BEZEL, POWER SUPPLY INCLUDED
• Manufacturer: 3M
• Series: C1500SSr
• Type: Capacitiver

Specifications of 11-71315-225-01

• Length: 12" (304.1mm)
• Width: 14" (350.4mm)
• Height: 9" (228.1mm)
• Interface: USB
• Diagonal Screen Size: 15" (380mm)
• Lead Free Status / Rohs Status: Details

22
Display Installation Problems
No image displayed
(blank screen)
Abnormal image
Colors of image are
abnormal
Disturbances on the
screen
Is the display receiving power?
Is the display receiving a valid video signal from the PC?
Is the display in Power Management mode?
Are the brightness and contrast settings too low?
• If the LED on the rear of the display is flashing orange/red, touch the
• Check that the computer’s power cable is connected properly and
• Check that the AC input jack is firmly plugged into the display.
• Check that the display’s power cable is connected properly and
• Try using another power cable.
• Try using another electrical outlet.
• Check that the computer is powered on.
• Check that the video cable is connected properly and securely to the
• Check that the LED on the rear of the unit is green.
• Check that no pins are bent in the video cable connector.
• Check that the video card is firmly seated in the card slot in your
• Check that the video input from the video card falls within the refresh
• Check that your computer is using a supported display mode. Refer to
• Use the display controls to adjust these values.
• Check that the video input from the video card falls within the refresh
•
• Check that the video cable is connected properly and securely to the
• Check that no pins are bent in the video cable connector.
•
screen, press any key on the keyboard, or move the mouse to restore
operation.
securely into a grounded electrical outlet.
securely to an electrical outlet.
display and the computer.
computer.
rate of the display. Refer to Table 1 for details.
Table 1 for details.
rate of the display. Refer to Table 1 for details.
Check that the video cable is connected properly and securely to the
display and the computer.
display and the computer.
The video display adjustments are incorrect. Refer to Chapter 4 for
adjusting procedures.
3M Touch Systems Proprietary Information
3M™ MicroTouch™ Display C1500SS Installation Guide