M600 BOGEN COMMUNICATIONS, M600 Datasheet - Page 2

• Manufacturer Part Number: M600
• Description: 600 WATT AMP /CHNL @ 4 OHMS
• Manufacturer: BOGEN COMMUNICATIONS

Specifications of M600

• Rohs Compliant: NO
• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No

* Both channels driven at nominal line voltage 120V AC, 60Hz. ** Module has Gain of 1. *** Requires 20A, NEMA 5-20R Type Receptacle.
into 4 ohms, respectively.
The amplifier shall provide 2 module bays for the installation of various input
modules. A dual-channel (balanced or unbalanced), high-impedance input mod-
ule shall come installed as a standard module in the amplifier.
The amplifier shall be capable of 3 distinct modes of operation. These are
Stereo, Dual Mono, and 70V Mono. In Dual Mono and 70V Mono, the amplifier
shall provide the function of a 2 x 1 mixer of the installed input modules.
Additionally, in the Dual Mono and 70V Mono modes, the amplifier shall allow
one module to mute the other installed module if desired.
The amplifier shall drive the speaker load directly without the use of an output
transformer.The amplifier shall allow a user-selectable low frequency roll-off of
65 Hz, 125 Hz, or no roll-off.
The amplifier shall have a defeatable sleep mode that greatly reduces idle power
consumption when the amplifier has not received audio for more than 3 min-
utes. The amplifier shall also include a clip limiting feature that automatically
reduces amplifier clipping.
Technical Specifications
Power Output
Input Sensitivity
S/N Ratio (20K BW)
Class of Operation
Product Weight
Connectors: Power
Power Bandwidth
THD @ 1 kHz rated power
Load Impedance
Minimum Load Impedance (Stereo)
Frequency Response @ 1 watt
Output Regulation, 1 kHz direct
Inputs (Plug-in modules)
AC Input Voltage Range
Maximum AC Current
Indicators
Temperature Range
Cooling
Physical Dimensions (W x H x D)
Protection
Special Features
Specifications*
* Architect and Engineer Specifications are available on CD and online in a Word
document to assist you with preparing your bids.
70V Mono
4-ohm
8-ohm
At Backplane Connector or using
Standard Input Module (incl.)**
Architect &
Engineer
Input
Output
The amplifier shall be a Bogen M-Class Amplifier, Model
M600, M450 or M300. The amplifier shall provide a
mono 70V output capable of 1200, 900 or 600 watts
respectively or, it can provide two independent ampli-
fier channels rated at 600, 450 or 300 watts/channel
1 kHz bridged
1200W @ 4 ohms
600W per channel*
400W per channel*
1.161V for 600W @ 4 ohms
109 dB ref. 8 ohms, F.P.
H
46 lb.
20A line cord***
Sleep Mode, Back-Slope regulation, Stereo, Dual Mono, 70V Mono Operation,Toroidal Power Transformer
Electronically balanced, high-impedance module standard, other modular input types available
M600
20A**
RF, DC, Low-frequency,Thermal, Low-Impedance, Circuit-Breaker, Short Circuit
5-pin "touch-proof" Barrier Strip, RCA Pre- & Post-EQ Output
2 new Bogen std. 12-pin connector modules/RCA input
Status (On/Protect/Sleep), Clip/Limit, Signal
The amplifier shall have three indicators that correspond to status, signal, and
clip/limit.
The amplifier shall allow the connection of external signal processing equipment
when in Dual Mono or 70V Mono modes.The signal flow shall automatically be
diverted to external equipment when connected to the effects loop.The ampli-
fier shall also provide both pre- and post-EQ signal feeds for distribution to
other equipment.
The amplifier shall include a system that automatically compensates for surges
or sags in AC line voltages of up to +/-10%. Additionally, the amplifier shall be
protected against over-currents, overloads, excessive thermal dissipation, DC
voltage, and short circuit on the outputs.
The amplifier shall be enclosed in a heavy-gauge steel chassis with recessed level
control knob, which can be protected by a removable plastic cover.The amplifi-
er shall be cooled by 2 independent continuously variable speed fans with eas-
ily removable fan filters.
The amplifier shall allow the attachment of rack ears (rear rack ears optional)
and fit into a 19" rack using two rack spaces. It shall also allow the attachment
of feet for tabletop placement.
900W @ 5.5 ohms
450W per channel*
300W per channel*
1.010V for 450W @ 4 ohms
106 dB ref. 8 ohms, F.P.
H
44 lb.
15A line cord
Forced Air Variable Speed Fan
20-20 kHz +/- 0.25 dB
15 to 105 degrees F
20-40 kHz .5% THD
17" X 3-1/2" x 16"
95-130V AC, 60Hz
0.5 dB @ 8 ohms
4-8 ohms, 70V
1.5 dB @ 70V
less than .02%
3.2 ohms
M450
15A
50 Spring Street, Ramsey, New Jersey 07446, U.S.A.
201-934-8500 FAX: [phone]
Web Site: www.bogen.com
15A line cord
600W @ 8 ohms
300W per channel*
200W per channel*
0.840V for 300W @ 4 ohms
103 dB ref. 8 ohms, F.P.
AB
41 lb.
M300
12A